Pair of Mid-Century Nightstands Before |
Nightstand After Refinishing |
These nightstands had layer upon layer of glaze which took a while to remove. Unfortunately, it was difficult to tell exactly when we had stripped the last of the glaze until we began staining. A good indication that you haven't quite removed all the previous finishes is when the wood repels the stain. When that happens, you can tell, trust me. The areas surrounding the spots where the finish hasn't been completely stripped will accept the stain, leaving the rest blotchy. It's frustrating because once you spend hours and hours stripping and sanding and sanding more, you expect that your hard work paid off and you can now enjoy the "fun" part of the process, staining.
The extra layer of glaze is hard to detect as it is practically invisible. Only when stain is applied does it become painfully obvious that the piece still requires a lot more stripping, sanding, and ultimately, labor. There's no way to avoid it, so you may as well accept it. Stripping is hard, tedious work, but it must be done. The end result was a pair of lovely, usable nightstands that will indeed withstand the test of time for another fifty plus years...or more.
Nice post. I learn something more challenging on different blogs everyday. It will always be stimulating to read content from other writers and practice a little something from their store. I’d prefer to use some with the content on my blog whether you don’t mind. I’ll give you a link on your web blog. I recently came to know about http://rainbowpowdercoatings.com/, their Furniture Restoration Services are very effective.
ReplyDeleteFurniture Restoration Services Thanks for sharing.