1940s Bedroom Refinishing Project

Low Dresser After

Low Dresser Before

This was one of several pieces of a 1940s vintage bedroom set which Jim recently refinished. It had seen some wear because it had been used for a few generations and needed some revitalizing and love. 

We were excited to take on this project which had two dressers as seen in this post. This bedroom set also had a mirror, bed with headboard and footboard and side rails (not pictured). It’s difficult to get photos of the items when they are delivered in sections. This furniture was in pretty good condition, had great bones, but the exterior had seen some wear and scratching, not uncommon for a vintage bedroom set. Luckily there was no structural or water damage which can be harder to rectify. 

Jim had blended two different stains to obtain a unique color that best suited the furniture. It turned out to be a perfect color for the dressers, resulting in a rich tone which best shows the woodgrain which was hidden prior to the refinishing. That’s one of the many perks of working with stains; custom blending which results in a unique color. It’s quite noticeable in the tall dresser (below) what a variation in color can be in the “before” photo. When furniture is made in a factory, the staining process is quite different from refinishing by hand. They use a spray stain that has a different look, more opaque so the woodgrain is not as visible as it is once it is stripped and refinished. One of the benefits of the hand stripping/refinishing process is that it exposes the natural beauty of the wood.

The scratches on the tops of the dressers were superficial, so they were easily sanded down once the dressers were stripped. Dressers require a great deal of work because each drawer is an individual section that requires removal of hardware and is treated one at a time while stripping, sanding and staining before finishing with polyurethane to protect the finishes. The low dresser (as seen in photos above) had six drawers with general depths. These older dresser have much more space than their newer counterparts and are made very well, so they are usually worth refinishing. It truly is an investment worth doing to preserve a piece of your family’s history.

Tall Dresser After

Tall Dresser Before

The taller dresser (shown left) had four large drawers and two smaller ones at the top. The oval hardware was original in the Federal style. Some customers prefer the original hardware and others like to give their furniture an updated look and replace it, but either way, refinishing a bedroom set is always worth doing because you already have made the investment in the furniture, so why not keep it for generations to come? It’s a wonderful way to honor your family’s history.