|
Corner Table Before |
|
Corner Table After |
I got lucky when I found this adorable corner table while visiting an antique store in Birch Run, while staying there for a night earlier this year in February. We love checking out local antique stores and estate sales while traveling. You just never know when you're going to find that "special" item you've been searching for. This was the case with this little gem of a corner table, which was exactly the right size.
The top shelve, edging and drawer is cherry and the other two shelves are pine, not uncommon for an old piece such as this. I decided to remove the edging, making it easier to remove the old finish, therefore sanding each piece and making repairs on one broken one, gluing together, then clamping it so it stayed secure. The table has a name and what could be a serial number on the bottom of the drawer; Butler, Style #517 - 1105. I researched it, but couldn't find anything other than there is a furniture company by the name of Butler.
|
Corner Table Top After |
|
Corner Table Top Before |
A little refinishing was all it needed, so I got busy sanding and stripping the entire table, paying special attention to the ridged detail in the front of each shelf. I used many sheets of folded sandpaper and sanding blocks which work great for the minuscule ribbing on the front of the shelves. If I wouldn't have removed all the finish, the new stain wouldn't have been absorbed, thus that area would have looked odd. It paid off, because the cherry stain I used looked great.
I finished off the piece with two coats of polyurethane and chose an antique porcelain knob to replace the almost invisible knob that had previously occupied the drawer's front. I was quite satisfied with the results, as this little table now graces the landing leading to the upper level of our house.
|
Corner Table on Landing |
No comments:
Post a Comment