Solid Cedar Chest Refinished

Cedar Chest After

Cedar Chest Before

A family heirloom such as this can become worn and scratched over the years, because it has been used by many people for various purposes. However, with the proper care and refinishing a lovely cedar chest such as this one can once again claim its rightful place among the precious memories it held for its previous generations.

This was a solid cedar chest with a brass latch closure on the front and brass accents on the top with decorative nails in each corner. In order to do the job correctly, Jim removed the brass accents on the top and polished them, replacing the old nails with new ones that contrasted nicely with the freshly polished brass. The interior was in immaculate condition, so it required no restoration. Sometimes the interiors of cedar chests have broken elements, such as a pull-out hinged shelf. In that case the hinge would have to be replaced and the shelf repaired. (We actually have a cedar chest with this feature). 

Since cedar chests can be very detailed or relatively simple in design such as this one was, they still have distinguishing features that differentiate them from others. This one had nice curved leg bottoms with a rosette design on the front. The soft curves are a nice contrast to the straight lines of the overall furniture. The front of this cedar chest had a brass latch to match the brass corner accents on the top of the chest. Over the years the locks are usually gone or have been removed to protect children from being locked inside. It's always nice to have the original hardware when refinishing a cedar chest or any other piece of furniture since finding the exact same hardware can be quite a challenge, but oh so gratifying when you do find it!

After Jim stripped and sanded this cedar chest and all the hardware was polished, he used a "natural" stain which is practically clear and protected it with two coats of satin polyurethane. The transformation was impressive and once again this cedar chest became a treasured heirloom to welcome future generations.

To see more cedar chests, please click on the links below:

https://finalefurniture.blogspot.com/2019/11/solid-cedar-chest.html
https://finalefurniture.blogspot.com/2016/08/1948-lane-cedar-chest_22.html
https://finalefurniture.blogspot.com/2015/04/elegant-cedar-chest-revival.html
https://finalefurniture.blogspot.com/2013/12/1945-lane-waterfall-cedar-chest.html
https://finalefurniture.blogspot.com/2012/06/my-waterfall-cedar-chest.html

Fireplace Mantel Revival

Mantel After

Mantel Before

This was an awesome looking mantel which the customer had purchased to update his fireplace. Unfortunately, someone else did the refinishing and didn't wipe off the stain, so the surface wasn't up to par. It required extensive stripping with attention to detail in removing the excess stain in the crevices of the corbels. 

The mantel was made from oak, but the corbels may have been a different wood since they accepted the stain much darker than the mantel itself, therefore left a variance in color. It actually looked pretty good once it had been finished and installed by the customer. Sometimes the finishing touch is the installation which makes the entire job look effortless, despite the amount of work involved in achieving it. Jim had to separate the corbels from the mantel while working on it to get better access to each piece. This is a better way to achieve great results when stripping multiple pieces. Once everything was stripped completely, he sanded the surfaces so they would accept the new stain. The end result was a much nicer, updated mantel which looked great with the new brick fireplace surround ad hearth.
 

Old Rocking Chair Revival

Rocking Chair After

Rocking Chair Before

Some projects go very smoothly. This rocking chair was not one of them since it was in dire straits. The arms were shredded and there was a large hole on the right top of the seat. The rocking chair was over 45 years old and had seen a lot of use, possibly damaged from a dog as well. Indeed, it was time for an upholstery revival on this old rocking chair.

The seat cushion was badly worn and the foam was so flat it wasn't able to support you properly. Originally a 3" cushion, the old cushion had been reduced to about 1-1/2 to 2". I had a brand new T-cushion made then designed a brand new cushion cover with the new material. It turned out perfectly. T-cushions can be tricky especially with top and bottom welt cording, which I used for this cushion. The curve-around zipper makes it easy to slip over the foam. Once that was complete, I tackled the back portion.

Unlike other chairs I've done, this one had a separate cushion on the front half but it was stitched to the inner back panel with the back section wrapped around the top and sides of the chair and attached to the interior of the back and sides. This made the removal process extremely difficult and as I soon found out as I progressed with the removal of the old material, it was apparent that this factory style method of construction would be impossible to duplicate. 

This turned out to be a typical catch 22 situation; during fabric stripping, I had to remove each section to learn how it was assembled, but when the time came to stitch it back together, I couldn't replicate the exact method as it was put together, since it had been taken apart to use for templates. Even with detailed markings, numbering and many photos, I found it simply wasn't possible to recreate the original construction, so I chose to build this rocking chair by building loose cushions for both the seat as well as the back. My preferred method had a couple of great advantages. It made the project's assembly much more efficient, because with loose cushions as opposed to attached, they can be easily dry-cleaned, plus the cushions can be reversed for even wear. Finally, the overstuffed cushions were really comfortable. Bonus!

I padded the backing and covered it with fabric front and back after replacing the original, insufficient webbing.  They had only three strips and I replaced those with four. Much stronger and more support. The under spring assembly was also covered with thin foam and finished off with the floral material. Edge rolls were used for comfortable seating. Once the structure was all done and the cushions in place, it fit together perfectly.

The customer selected a lovely floral pattern which was a far cry from the original outdated and worn material which had seen better days. The bones of the chair were very good, strong and stable, so with the newly upholstered material, this chair should last for many years to come.