Decorative Walnut Antique Cedar Chest

Walnut Cedar Chest Before

Having refinished several cedar chests, this was definitely the most decorative and detailed ones I'd ever seen. I had no clue as to its age, as it had no markings on it, but judging by the way it was made and the materials used, I estimated it to be well over one hundred years old. It had no shelf on the inside, as many cedar chests do, but it was roomy enough to store many blankets, quilts and sets of sheets.

In order to properly restore this cedar chest in the best way possible, I removed the back decorative scroll, which had veneer damage, as well as the side scroll features, which were solid walnut, no veneer. The bottom of the chest was missing a back leg post and the veneer was damaged or missing. I knew this would be a major

Walnut Cedar Chest After

project, but to do it justice, it needed to be done right.

After removing the scrollwork, I began the tedious task of stripping the old finish with my choice gel stripper. Stripping is extremely messy work and requires several applications of stripper and many passes with a putty knife. The method I use is slow and steady, but gives excellent results. After liberally applying the stripper, I leave it on a bit, then slowly pull the putty knife toward myself (as to avoid gouging the wood) bringing a thick, gooey layer of the old finish and the now brown stripping compound with it, then swipe the entire mess into a plastic margarine container. (Never underestimate the use of these handy containers!) 

For the hard to reach areas of the cedar chest I used a wide selection of wood carving tools which are quite handy to get into the nooks and crannies, such as the front panel and beaded detail. I scraped as much old finish off as I could with the tool of choice, then used a small brass brush to remove residue I was unable to scrape off. I then used a steel wool pad to remove the rest of the residue prior to sanding. For this cedar chest I chose not to use my orbital sander, instead opting for hand sanding because of the beading and panel detail on the front.

Curio Cabinet/Desk

Curio/Desk Before

This may not be an antique, but it is certainly a unique item of furniture.

Curio/Desk After

Lucky for me, it didn't require a great deal of work as it was in pretty good condition when I acquired it. I replaced the makeshift wooden pegs (made out of dowels) which held the glass shelves, with metal shelf pegs. Much sturdier. I then glued soft felt to each peg to protect the glass shelves. I thought it was a unique piece of furniture, because on one side you can display collectibles and the other side was a pull down desk surface which instantly turned this flexible fine piece of furniture into convenient place to compose a letter, pay bills or use a small laptop computer to do your homework (if you're a student.)