Mid-Century Modern Coffee Table

Coffee Table Before

It was not uncommon for a coffee table such as this to be used in households across the country during the 1950’s-1960’s. They usually had a top and a lower shelf where people would store their T.V. guides (which have become obsolete) as well as books, magazines and other keep close items. This maple table was likely used in a living room to serve multiple functions.

Coffee Table After

But like many items of furniture that are used on a daily basis, this table had also experienced wear and staining over the years and needed some TLC to bring it back to its original glory.

The first step in most restoration and refinishing projects such as this is a thorough stripping with liquid stripper and lots of elbow grease to remove the debris from the stripper and the old finishes that come off in a goopy and sticky mess. (It’s handy to keep plenty of empty margarine and cream cheese containers handy for this purpose).

Stripping and sanding is always long and tedious, but necessary process to remove all the previous layers of grime. Once this had been achieved, we give it a good sanding so it will accept the new stain. This table had a lovely brass decorative accent border on the top. We chose to remove this so it didn’t get damaged during the refinishing process, then cleaned it up later prior to re-applying it. This is the jewelry of the furniture as it sets off the finished piece and makes it look great. We opted for golden pecan stain with a satin polyurethane to protect its finish. Most table tops receive three coats of poly for extra durability. This table had delicate legs which was a sign of great craftsmanship and the fine art of mid-century modern furniture.

Painted Cedar Chest Revival

Cedar Chest Before

Cedar Chest After

This is one of many cedar chests we have done, but it is the first one we have refinished that was painted. Personally, I can’t imagine why someone would paint a cedar chest, as the wood itself is too beautiful to cover up. My customer had purchased this painted cedar chest at an estate sale and wanted to see what was hidden beneath ugly green paint. I innerly groaned envisioning someone slapping paint on such a lovely piece of furniture. We had our work cut out for us!

The refinishing process is tedious, but when we get a painted item of furniture that the customer wants stained, it is necessary that every spec of paint is removed, because once it is stained, if not removed, that paint will be visible. Therefore, the stripping and sanding process must be done with intense precision and close attention to detail. It is easy to overlook the small crevices, but they too must be stripped of any and all remnants of paint or any other old finish. That’s where the wood carving tools come in quite handy as they allow us to get into the tiny spots that paint can get trapped.

You never really know what the wood will reveal once the paint has been removed, but as with most cedar chests, this one was was quite beautiful. It had accent strips on the front with wood “buttons” for a bit if decorative flair. It has great lines and a lift-up shelf not the inside. It was also a Lane, so a commonly known brand name that many people have experience with. Upon research, I discovered that Lane cedar chests have the date they were made stamped on the underside of the chest in reverse.  (Therefore if your cedar chest’s serial number is 649010, it was built on January 9, 1946). 

Cedar Chest Before

Cedar Chest After

The inside bottom of the Lane brand cedar chest has a large inset dowel, with a screw that you can turn to release the cedar fragrance. Cedar chests are natural moth repellants, so they are much sought after for precious linens or vintage and antique quilts, to keep them free of these destructive pests and hole-free.

Not all cedar chests have a serial or date stamp on the bottom as there were many manufacturers of cedar chests across the country. Lane is a popular brand that offers a variety of styles and sizes.

Upon completion, this lovely Lane was once again in its original condition, showing off its many tones of wood with that easily recognizable cedar fragrance that we love and moths hate!

Finished Cedar Chest

Check out other cedar chests we have refinished by clicking on these links:
https://finalefurniture.blogspot.com/2019/11/solid-cedar-chest.html
https://finalefurniture.blogspot.com/2016/08/1948-lane-cedar-chest_22.html
https://finalefurniture.blogspot.com/2015/04/elegant-cedar-chest-revival.html
https://finalefurniture.blogspot.com/2013/12/1945-lane-waterfall-cedar-chest.html
https://finalefurniture.blogspot.com/2012/06/my-waterfall-cedar-chest.html

Solid Cedar Chest with Copper Accents

Cedar Chest Finished

I've refinished many cedar chests since I began working on furniture, but I don't often get cedar chests that are solid cedar. This is actually my second cedar chest. Take a look at my first one by clicking on the link below: (http://finalefurniture.blogspot.com/2014/10/solid-cedar-chest.html).

Like the first cedar chest, this one had no veneer and was made of solid cedar, although it was a bit larger than the first one. It also had a unique feature, two copper straps on each side, attached with furniture tacks. The copper had been quite tarnished, a natural process which happens over aging, therefore it needed its own restoration.

Cedar Chest Before

To clean the copper straps the proper way, I carefully removed them by using my vice grips and pulling off the tacks that held the straps in place. (Unfortunately eight of the original tacks snapped when I removed them and couldn't be salvaged). There were two long straps on the top and two shorter straps that continued down the front. I cleaned them individually, using copper cleaner, a toothbrush, a wire brush and a lot of elbow grease.

Left Strap Before

Eventually I removed the tarnish to reveal the beautiful original copper hidden beneath it. For the tacks, I used my handy dandy wire brush which is attached to my bench grinder and cleaned them up enough to paint them black, (making a mental note to look for new ones to replace the ones that had broken).

Like all my other stripping projects, I used a strong chemical stripper to remove the old finish on the chest, liberally applying it and using a metal putty knife to scrape away the messy brown goo and swiping it into an empty plastic container. I find this to be the most effective way to get rid of the first layer of

Left Strap After

old finish, then follow up with as many applications as needed to remove as much residue as possible.

Right Strap Before

Working with solid wood is so much easier than veneer, because one, it is easier to strip and two, it looks amazing when you get to the bare wood hidden beneath all that dull old grime. After the surface is no longer sticky with residue, I used steel wool dipped in acetone to remove any remaining chemicals before sanding. I always start out with a 100-150 grit sandpaper, eventually working up to a 220 grit, which gives the wood a smooth surface which will better accept the stain. After the sanding was complete, I wiped it down with a rag dipped in acetone or laquer thinner and it was ready for stain, my favorite part! This cedar chest didn't need stain, so I left it natural, but applied three coats of semi-gloss polyurethane to protect the surface.

Quick Tip: don't skimp on brushes when applying polyurethane! A cheap brush will not give you the quality and look your furniture deserves. Use a good brush with thick bristles and keep it clean between uses by soaking it in acetone and wrapping it in a paper towel. This will prolong your brush for many applications.

One of the rear legs was split in two, so I removed all the legs and refinished them each separately. The wheels had to come off, so Jim cut them with a bandsaw because they were impossible to pull out. The split wheel was attached with a "molly bolt," which expanded into the pre-drilled hole, making it impossible to remove without further

Right Strap After

damaging the leg. They too were made of cedar. I glued the broken leg back together, clamped it with my bench vice and screwed it securely back into the cedar chest after it was refinished.

Reassembling the individually restored components of any furniture project is always my favorite part, this one being no exception. The shiny, clean copper straps added a special feature to this old trunk and the painted black tacks gave it character. Luckily I was able to locate the exact same tacks at my local hardware store! They were called "furniture tacks," which are different from household tacks because they have a longer tack point and a rounded head.

Working on this cedar chest was quite satisfying, because hidden under years of old finish and scratches, was a gorgeous piece of aromatic furniture. The most confusing part of the restoration process though, was I didn't know if I should be hanging in a closet or running on a hamster wheel...😉

Decorative Walnut Antique Cedar Chest

Walnut Cedar Chest Before

Having refinished several cedar chests, this was definitely the most decorative and detailed ones I'd ever seen. I had no clue as to its age, as it had no markings on it, but judging by the way it was made and the materials used, I estimated it to be well over one hundred years old. It had no shelf on the inside, as many cedar chests do, but it was roomy enough to store many blankets, quilts and sets of sheets.

In order to properly restore this cedar chest in the best way possible, I removed the back decorative scroll, which had veneer damage, as well as the side scroll features, which were solid walnut, no veneer. The bottom of the chest was missing a back leg post and the veneer was damaged or missing. I knew this would be a major

Walnut Cedar Chest After

project, but to do it justice, it needed to be done right.

After removing the scrollwork, I began the tedious task of stripping the old finish with my choice gel stripper. Stripping is extremely messy work and requires several applications of stripper and many passes with a putty knife. The method I use is slow and steady, but gives excellent results. After liberally applying the stripper, I leave it on a bit, then slowly pull the putty knife toward myself (as to avoid gouging the wood) bringing a thick, gooey layer of the old finish and the now brown stripping compound with it, then swipe the entire mess into a plastic margarine container. (Never underestimate the use of these handy containers!) 

For the hard to reach areas of the cedar chest I used a wide selection of wood carving tools which are quite handy to get into the nooks and crannies, such as the front panel and beaded detail. I scraped as much old finish off as I could with the tool of choice, then used a small brass brush to remove residue I was unable to scrape off. I then used a steel wool pad to remove the rest of the residue prior to sanding. For this cedar chest I chose not to use my orbital sander, instead opting for hand sanding because of the beading and panel detail on the front.

Antique Vanity Makeover

Vanity Before

Vanity After

This vanity had been in my customer's  in-law's family for a few generations. Neglect and time took its toll on this lovely vanity as the scratched surface attested to. However, I assured my customer I would make it shine and indeed, I did. The first step was to remove the hardware then get it ready for sanding and stripping, which was immensely tedious because the sides have a fluted rounded edge which required a metal brush to remove all the previous finishes, all part of the stripping process.