Showing posts with label whitewashed. Show all posts
Showing posts with label whitewashed. Show all posts

Saturday, June 13, 2020

Bedroom Set Stripped and Whitewashed

Vanity Before
Vanity After

This is one of three bedroom pieces that came to us with an old yellowish paint that was at one time supposed to be much lighter. It had oxidized over the years and obtained some wear, so a refresh was in order.

My customer had wanted a whitewashed finish, so a full strip, sanding and application of white stain, which creates a whitewashed finish that she had wanted. The hardest part is always removing the old finish before anything else and with the amount of detail in this set including ball and claw feet, the stripping and sanding process took a great deal of time. This had to be done to all three pieces, removing the original hardware which luckily, was all in tact and accessible.

Dresser Before
Sometimes hardware pieces get missing so must be replaced. But
Dresser After
mostly, people prefer to use the original hardware in their restoration process.

When changing the entire appearance of an item such as going from stain stripping to painting for a more modern appearance, they will sometimes elect to replace the old hardware with newer, more modern hardware. It’s all personal preference, but it always looks great when it’s done.


Night Stand Before
Night Stand After





Friday, July 12, 2019

Antique Table and Chairs Whitewashed and Painted

Antique Table Before
Antique Table After
This antique table had been in the customer’s family for generations, however, she wanted an updated look for her lake house and decided that lighter and brighter would accomplish that. I recommended painting the chairs and legs and then using a “whitewash” technique for the table top. This was not an entirely new experience for me, as I had done something similar with a teak table and chairs set. However, this one was slightly and required a few additional steps. The table top was stripped and the legs got a better-than-average sanding, Next step was two coats of primer on the legs, then two coats of Sherwin-Williams "Pure White" paint. This table had a unique feature; the leaf extensions pulled out from each side then lifted up to the same level as the rest of the table. Because of this feature, the underside of these extensions had to be painted white to match the legs, since you could see them when the extensions were being used.

Sunday, April 15, 2018

Teak Table and Chairs Upgrade

Teak Table and Chairs Before
Table and Chairs After
Every so often we get a special furniture job which requires lots
of attention. This very curvy teak table with matching corner chairs was such a project. I had never seen another table and chair set that looked like this one, with chairs that literally wrapped around the curved corners of the table.

Indeed this was a nice little package of table and chairs which was being upgraded from worn outdoor to being used as a kitchen table.

Chair Before
Chairs After Stripping Raw Wood
My customer wanted a whitewashed look to match her cabinets. I had not used this technique before, but was ready to give it a try. But first the tedious and time consuming process of stripping and sanding had to be done. And wow! It was deceivingly harder than we had thought it to be, because chairs by their nature have a LOT of surface area and these chairs, with their unique curvy feature had an angled corner leg, which created a lot of tiny crevices to get into and strip so that they would accept the new stain.
Chair After Staining

The table had a center support with four branches that supported it and didn't interfere with the way the chairs pull up to the table. After sanding the top to bare wood, the gorgeous teak that was hiding beneath layers of outdoor wear became visible. It made sense to turn the table upside-down and work on the underside that way. After two long days of carefully stripping and sanding the detailed underside, the table was ready for stain. Each chair took a couple of days to fully strip and sand so they would accept the stain well.

Teak Table Before
I used "Coastal Boards" stain, which was actually an off white shade that, unlike paint, wiped off easily and left a beachy style finish which was very similar to the whitewash technique. The finished set looked great, exactly what I had envisioned. The teak took the stain well and ended up with a slightly creamy appearance to give it an updated, modern look to be enjoyed for years to come.

Completed Set in Kitchen



Teak Table After