Antique Mahogany Swivel Table

 

Swivel Table Before

Another beautiful swivel table! This antique was made of mahogany with brass accents. The lower portion of this table had a unique “harp” design with three brass prongs, that cleaned up real nice. The top was in rough shape and had seen years of use, including water damage likely from placing a planter directly not the wood. It’s always a good idea to have a planter with a tray or aluminum pie tin to eliminate water damage. 

Swivel Table After

This table was in need of stripping, sanding and new stain. We chose special walnut stain and three coats of semi-gloss polyurethane to ensure protection from everyday use. All the brass accents, feet, harp metal and two small knobs (not seen in photo) were cleaned and polished. Polishing the brass, truly accentuates the refinishing process. It also adds a special “bling” to any piece of furniture, much like the right jewelry does for an outfit.

This style of table is used for playing board games or cards, as it has a “secret” swivel compartment beneath the top that is accessible by rotating the table 90 degrees, then opening one side to reveal the compact area beneath, just large enough to hold note pads, decks of cards and paper goods. When not being used as a game table, it folds in half and can be pushed right up against a wall and used for decorative accents such as plants, lamps or collectibles. Now that it has been refinished, this table will likely be used for many card games and other fun activities.

Little Black Chess Piece Table

Chess Piece
Table Before

This little gem is another furniture item to add to our collection of painted black tables. As like the previous posting, our customer had envisioned this table being stripped and stained, but like the last table the wood beneath the gray paint was simply not stainable. It was splotchy and had absorbed the paint into the wood grain. There were two coats of paint on this table, black then gray on top of the black. It was also never primed, which contributed to the discoloration of the

Chess Piece
Table After

wood, making it not stainable. 

So, black was chosen once again as the color choice because it is popular for modern life and matches everything. This little gem was only about 16” in diameter and only about 24” tall, so not very big but big enough to keep a lamp or set down a cup of coffee. 

Needless to say the stripping process was intense and took a couple of days to remove all that paint enough for it to be properly primed and prepared to receive the new paint, which for this table we chose to spray on since it was late summer. We generally can’t paint in the colder months because it’s just too cold and the spray painting doesn’t work very well in cold weather. The finished black table was outstanding and made a huge difference. I told Jim I think the table looked like a large chess piece because of the interesting detail on the underside of the top, lending it a chess piece look. Very cute and very functional, this little chess piece table is once again a nice addition to the customer’s room.

Table Re-painted in Beautiful Black

Table Before

We mostly prefer stripping furniture to reveal the beautiful wood beneath and then stain it as it would have been done naturally, but it doesn’t always work out that way and there’s a good reason why the furniture was painted instead of being stained. This antique folding table was a prime example of why painting is better than stain as it would not accept stain. The reason was that it was made up of different types of wood and most of the paint had penetrated the wood’s surface, therefore making it not stain-worthy. Luckily our customer understood the situation and opted for paint instead.

Table After

We stripped this table as we do most other furniture items with stripper and plenty of elbow grease. Once the table was completely stripped, each area then gets carefully sanded to remove as much rough surface as possible. This prepares the piece for the next step, primer. Any time you have raw wood, primer is a must do as raw wood will soak up all the paint if it is not primed first. You can purchase paint with primer in it, but we prefer these processes to be kept separate because we find it gives us better results and a smoother finished surface. 

You generally don’t need polyurethane on a painted item unless it will be used outdoors, but then you would be better off using outdoor paint. Adding polyurethane or lacquer to a painted item will over time turn it yellow. Just a little piece of advice to keep in mind...

While we can paint furniture in any color the customer chooses, as this is a personal preference, but black seems to be the most popular colors because it is neutral and versatile and looks great when accompanied with brass accents such as this table’s feet. We always clean the hardware and additional accents such as brass feet on tables or hinges, because it finishes the piece nicely, giving it “bling,” as well as a fresher look. 

This table had two fold-out leaves, which doubled its size, making it a great table to use when you need more seating. Its compact size made it easy to store when not being used for a dining table and can instead be used as an accessory table. The classic black was a great choice and kept the original integrity of the table in addition to giving it a fresh, new appearance that will look great for decades.

Eastlake Lamp Table

Eastlake Table Before

Eastlake Table After

Eastlake furniture is easy to identify by its unique carvings on the legs of tables and other parts of larger furniture.

This Eastlake table is likely early 1900’s and has seen its share of wear over the years. The legs were in pretty good condition, but the top had rings and dark water stains in addition to the usual scratches. At least it hadn’t been painted, since we’ve done a few Eastlake items that had paint and all that detail was hidden beneath the layers of paint. It’s always a joy to see the wood in all its glory on a lovely item of furniture such as this.

Luckily the stains and scratches weren’t too deep and could be sanded out. The top needed the most attention, so once the sanding was done, a new coat of stain brought the century old table back to life. Protected with three coats of polyurethane, the table top was once again renewed and will be well preserved for many years to come. This table was a perfect size to use as an accessory table between two loungers or as a corner table in a living room. Restoration of this table was a true pleasure as the original beauty of the wood was the crowning glory of the renovation.

Antique Table and Chairs Whitewashed and Painted

Antique Table Before

Antique Table After

This antique table had been in the customer’s family for generations, however, she wanted an updated look for her lake house and decided that lighter and brighter would accomplish that. I recommended painting the chairs and legs and then using a “whitewash” technique for the table top. This was not an entirely new experience for me, as I had done something similar with a teak table and chairs set. However, this one was slightly and required a few additional steps. The table top was stripped and the legs got a better-than-average sanding, Next step was two coats of primer on the legs, then two coats of Sherwin-Williams "Pure White" paint. This table had a unique feature; the leaf extensions pulled out from each side then lifted up to the same level as the rest of the table. Because of this feature, the underside of these extensions had to be painted white to match the legs, since you could see them when the extensions were being used.

Antique Spindle Table

Antique Spindle Table Before

Antique Spindle Table After

In restoration, spindles are simply not our favorite things to refinish for obvious reasons; they are a LOT of work. This table, however, required only a sand "touch up," for the legs. Only the top was stripped and sanded down to bare wood, then stained with golden pecan stain and finished off with three coats of semi-gloss polyurethane.

The legs were lightly sanded and touched up with walnut stain, since they were originally made from walnut, so keeping the stain original was the right choice. Likely this table dates back to the early twentieth century, or late nineteenth century judging by its design and the many spindles used to create it. You can usually spot an older piece of furniture by the screws, how it it assembled and the way the wood is connected.

There are other telltale signs, such as the natural patina of the wood, which as it ages, can become dull, the finish almost completely gone as was the case with this table. This is a plus because it makes the tedious job of sanding less time consuming than removing all that old finish which can take days. All in all this little table looked completely different once the top was refinished and the legs were refreshed with a bit of stain and new polyurethane.

This table had a lovely burled maple with a center point pattern. This designed is achieved by cutting the tree section in quarters, then matching the four sections so they meet in the center to create a unique and harmonious, gorgeous table top. Never doubt the value that refinishing an antique can bring to your old furniture. If you own it, you already have the value in the furniture. It's always worth saving a piece such as this.

Couch Table Chalk Painted

Couch Table Before Painting

This [behind the] couch table was the second project I painted using "Annie Sloan's" chalk paint and wax system. As in the Queen Anne Table in the blog post below, I used Annie Sloan's French Linen chalk paint.

I gave this table a shabby chic "distressing" by

Couch Table After Painting

scraping away the paint randomly with steel wool and a folded scrap of 100 grit sandpaper. After the paint had dried, I finished the table with generous coat of Annie Sloan's clear wax, then highlighted the border detail with Annie Sloan's black wax which brought out the border detail along the edge of the table top.

Once the wax had dried 24 hours later, I was able to lightly buff the table until it had a smooth finish which will be easy to maintain and provide a lovely, durable piece of furniture for many years.

Queen Anne Table Chalk Painted

Queen Anne Table Before

This was a lovely Queen Anne table in need of a new look and it was decided that paint would achieve this nicely.

Queen Anne Table After

Chalk paint is great to work with. The first coat shows the brush strokes, but this goes away after you paint the second coat giving you great coverage. It also dries very quickly, in 20 minutes so you can easily finish a project from start to finish the same day. Chalk paint has unique qualities and those qualities allow you to experiment with finishes, such as waxing. Prior to this project I had not heard of chalk paint waxing, but I was willing to give it a try.

Teak Table and Chairs Upgrade

Teak Table and Chairs Before

Table and Chairs After

Every so often we get a special furniture job which requires lots
of attention. This very curvy teak table with matching corner chairs was such a project. I had never seen another table and chair set that looked like this one, with chairs that literally wrapped around the curved corners of the table.

Indeed this was a nice little package of table and chairs which was being upgraded from worn outdoor to being used as a kitchen table.

Chair Before

Chairs After Stripping Raw Wood

My customer wanted a whitewashed look to match her cabinets. I had not used this technique before, but was ready to give it a try. But first the tedious and time consuming process of stripping and sanding had to be done. And wow! It was deceivingly harder than we had thought it to be, because chairs by their nature have a LOT of surface area and these chairs, with their unique curvy feature had an angled corner leg, which created a lot of tiny crevices to get into and strip so that they would accept the new stain.

Chair After Staining

The table had a center support with four branches that supported it and didn't interfere with the way the chairs pull up to the table. After sanding the top to bare wood, the gorgeous teak that was hiding beneath layers of outdoor wear became visible. It made sense to turn the table upside-down and work on the underside that way. After two long days of carefully stripping and sanding the detailed underside, the table was ready for stain. Each chair took a couple of days to fully strip and sand so they would accept the stain well.

Teak Table Before

I used "Coastal Boards" stain, which was actually an off white shade that, unlike paint, wiped off easily and left a beachy style finish which was very similar to the whitewash technique. The finished set looked great, exactly what I had envisioned. The teak took the stain well and ended up with a slightly creamy appearance to give it an updated, modern look to be enjoyed for years to come.

Completed Set in Kitchen

Teak Table After

Antique Oak Folding Table

Folding Table Top Before

Table After

Every so often we will get an absolutely divine piece of furniture such as this antique folding table made of solid oak. As a furniture refinisher, I prefer working with solid wood over veneer because you can't beat the outcome of a great piece of wood that most antique furniture is made from. To be a true antique, an item of furniture should be at least 100 years old, otherwise they are considered vintage.

Hand Carved Glass Top Table

Table Before

Table After

I'm always impressed with hand carved wood such as this gorgeous Bavarian style table, a unique piece with lots of charm.

The table had a removal glass top which was also encased in matching wood with a lovely curved edge. The glass was quite scratched, a clear sign that whoever had owned this table had put it to use, which is wonderful because furniture is meant to be used and shown off.

From Amish to Amazing!

Amish Dining Set Before

Amish Dining Set After

This was a very well made, but dated Amish table and chairs set
which needed an update to match a newly remodeled kitchen. The table and chairs set was gorgeous oak with a large base. My client had seen a photo on Pinterest with a table and chairs set that had stain on the tabletop and seats and the rest was painted off white. It was a great look, so the decision was made. We received the table and chairs, then got to work.

The first step was to sand everything, top to bottom, then stripping the chair seats and tabletop, so it would accept the stain. With all the details in the wood, spindles and such, this was quite the time consuming task, which required a lot of patience and sanding tools of all kinds. Large sanding blocks for bigger areas and tiny sanding tools for all the crevices between the chair rails and the seats. The right tools make the job so much easier! Nothing replaces carefully hand sanding furniture.

Once all surfaces were sanded, we decided on painting first, saving the stained surfaces for last, since it would be easier painting around the stain instead of staining around the paint. It proved to be the right choice because even with light tack "Frog Tape," some of the stain seeped onto the painted areas, but not a problem as I was able to use an artist's paint brush and touch up those areas easily enough. Simple, not easy. It took hours to do this but the end result was worth the time spent. The paint we used was Sherwin-Williams "eggwhite," which was a soft off white, perfect for the "Country French" style the clients wanted. This new color matched their kitchen cabinets and blended right in with the newly remodeled kitchen. The end result is the clients got exactly what they had envisioned and it looked amazing!

Below, I had a bit my fun with my photo computer program and "merged" a "before" and "after" photo of one of the chairs so you can see what it looked like prior to the new finishes. It's not easy to create this kind of photo, because you literally have to be standing in the exact same position for each photo, then make them look like they are the same photo, even though they were taken weeks apart. It's a great way to see on one photo the huge difference a right redo makes for a worn out item of furniture. This was definitely a challenging job with stunning results.

Table Top Makeover

Table Before Refinishing

Table After Refinishing

This tabletop had seen many years of use and was crying out to be refinished. It was also extremely heavy, therefore needed a firm grip just to get it onto our work surface. Made of solid birch and about 1-1/2" thick, the table seated at least 8 people. The legs required nothing because they were made out of metal, which was a perfect foundation to turn this 1980's table into an "industrial urban" table. Giving new life to an outdated piece of furniture is the greatest reward of the inevitably tedious amount of work that these projects require.

Beautiful Oak Table Refinish

Oak Table Before

This great oak table had strong "bones," but the surface had minor surface scratches and required gentle sanding and a new finish of golden oak stain to create a better than new look. Oak is one of my favorite woods to work with because it handles sanding well, allowing the grain, commonly hidden by layers of grime and

Oak Table After

wear, to come to light. 

Decent sized, this table was the couples' primary dining table, so I made sure I put a "rush" on it and got it done quickly. Lots and lots of sanding and three coats of polyurethane, this little gem was once again a great piece of furniture that can be used for years to come.

Dining Room Makeover

Chair Before

Chair After

This antique dining set belonged my customer's grandmother. She had many fond memories of family dinners, sitting at the table for all those wonderful holiday meals. Unfortunately, after her grandmother's passing, the set wasn't used and the years passing had taken their toll. She wanted the set refinished, so we had our work cut out for us.

Their were six chairs and a table with two extensions. The chairs were lovely, lots of detail in the carved fruit back and shapely legs. The set was also mahogany. These chairs had been quite banged up and required a great deal of TLC and many hours of stripping and sanding before the stain could be applied, but afterward the set had not only been restored, it was even better than new!

Table Before

Dining Set After

My customer had ordered upholstery fabric and had the chairs re-upholstered elsewhere. I love the beautiful robin's egg blue fabric with its bumble bee design. It matched her carpet and decor perfectly. I can't image a better choice for fabric. Once delivered, I was able to capture a photo of the entire set in its original setting, showing off the beauty of the furniture and all the many hours of work that went into it.

Dining Set in Customer's Home

Table With A Twist

Table After

Table Before

My friend, Frances, had asked me to refinish this unique table which
belonged to her husband. I had never seen one quite like it. What made this table so different was that the entire top swiveled. Perhaps it had been used as a television table many years ago. In any event, what she saw was an ugly table was merely a nice table with an ugly, worn finish. It just needed a little love.

First things first, I removed the pivoting top to reveal a large metal swivel mechanism which needed some persuasion, therefore, I greased the bearings and cleaned the metal, making the mechanism much easier to rotate. It was mounted to a rather thin, broken piece of masonite, which I replaced with a piece of 1/4" plywood. Much better.

Mosaic Table

Table Before No Top

Table After Mosiac

This table belonged to a friend who had passed away. It came to
me without a top. I liked the corner detail, which was hidden. My idea was to turn this little neglected gem into a work of art and as I looked at it, an idea came to mind.

First I assessed it. There wasn't much wood surface showing, so why not paint? I chose to paint it totally black. Next it needed a new top. The curved edges lent themselves to a different style. Something else other than wood would set this table off. Then it came to me. Mosaic. It was perfect! I knew I wanted it to have a bit of "bling," so I used mirror with a cobalt blue border.

Table Before

Table Before

When I got into the center area, I knew I wanted a design, and thanks to
my granddaughter, I came up with a peace sign. She was my inspiration for the peace sign because she loves them. Reminiscent of the 1960's, I thought it was also the perfect solution to my design. But that was not enough. It needed more, so I decided to paint the curved designs in the corners to bring out the flowers and make them match the colors of the glass mosaic I chose. The table was finally how I had envisioned it to be. The table had taken on a whole new look...from neglected and broken to a work of art.

Nightstand Gets Painted Eggshell

Nightstand After

Nightstand Before

This little nightstand was a job for a customer who wanted it to match her dressers, however, the end result didn't match so I suggested painting it. As a traditionalist, I normally lean toward refinishing wood, as opposed to painting it, but sometimes painting is a great solution. This was a great example of paint vs. stain, as the wood didn't accept the stain very well, thus making the wood a great deal darker and no longer matching the dressers. This is caused by absorption, which determines the wood's ability to take on the proper color. When I suggested painting the piece, my customer agreed and purchased an eggshell white that matched her bed. The bottom line was a great little table that received a coat of paint and a brand new look! Be open to your finishes, because you never know how great something will look until you try it!

Here's another nightstand we've painted: http://finalefurniture.blogspot.com/2013/11/nightstand-gets-facelift.html

Bavarian Hand-Carved Table

Bavarian Before

This table came to me as a referral from a woman who'd

Bavarian After

purchased the "Petite China Cabinet" from me. She told her friend about my work and soon, her friend called me and asked me if I could refinish a table for her. She then brought over this very challenging project; a table that looks like something you'd see in Frankenmuth. To those of you who live in Michigan, you've probably been to, or at least heard of "Frankenmuth," known as "Little Bavaria." The two restaurants, "Zehnders" and "The Bavarian Inn" have famous chicken dinners that lure thousands of visitors daily, filling up on the excellent German cuisine and enjoying the ambiance of "Little Bavaria," shops and all. Anyway (sorry for getting off-track) this table reminded me of something you'd see at The Bavarian Inn because of its intricately hand-carved legs. It also had a removable glass top, which was interesting, since one of the items I'd sold to the other woman who also bought my china cabinet was my oval table which too had a removable glass top which had doubled as a serving tray. To see another table with a glass top was really amazing. While the glass on this table was in pretty good shape, the the frame was scratched up. In order to make this look pretty again, I had to completely hand-sand the frame and re-stain it, then spray it with semi-gloss polyurethane. The results were amazing! I can't believe it's the same scratched frame she brought over.

Top Before

The table was another story entirely. It was pretty scratched up,

Top After

top and legs, but again, I was up for the challenge and began the tedious task of hand-sanding, a time-consuming job to be sure, but the only way to get the results to make this piece glow again. Once I had completed sanding, I carefully applied a walnut stain to the legs and cherry stain to the top. This table had at least three different types of wood. The top veneer sported a burled maple, which was gorgeous in addition to smaller bits of birch.

The end result was a table that was void of scratches that will last a long time. What an outstanding piece this turned out to be! So you be the judge: Bavarian or not?