A Very Old Rocking Chair Revival

Rocking Chair After
Refinishing w New Leather

Old Broken Chair
Before Refinishing

When we get an item of furniture, it varies in degrees of just
how bad it is and how much work it requires to get it looking good again. Jim and I love a challenge. The uglier it is, the more we love restoring it, because it provides us an opportunity to make it beautiful once again, in most cases, better than new. 

This old rocking chair was exactly the type of piece that gets us both excited in anticipation of what’s inside, what we’ll find and how to best treat the piece with the care it needs. And this one needed a lot of love. The springs were literally popping through the deteriorated fabric (see photo below). The stuffing was long gone and the webbing was hanging from the underside of the seat.

The first step in this type of restoration is removing all the old materials. And this chair had a LOT of decorative (at one time) nail heads that needed to be removed. Nail heads usually get bent when they are installed because the wood is so hard, it bends the nails, so they can seldom be reused. I recommended instead of using nail heads, I’d replace them with new welting, which is also known as cording or piping. This is a cleaner, more updated look and still appropriate for this type of chair.

Antique Mahogany Table Makeover

Mahogany Table Before

We've done plenty of tables since we started restoring furniture, but this by far was one of the most unique antique tables. This was a lovely "sewing table" with fluted edges on the top shelf and beading on the edge of the lower shelf. Unfortunately its structure was quite wobbly, because the points of

Mahogany Table After

attachment were very delicate and the legs were spindly and thin, which affected the overall stability. The only thing we could do to shore then up was add a few pin nails on the back side of the legs at the attachment point between the two shelves.

This table was in great overall condition, but the row of beading on the bottom shelf had beads missing, which needed to be replaced. I searched online for the right size replacement beads and discovered a few things. The first, beads such as the ones on this table are difficult to find, plus I was not able to get furniture beads in a dark

Old Rocker Makeover

Chair Before

Chair After

This rocker had a great structure, but the fabric was shot and needed to be replaced. It had also been used as a scratching post for a couple of cats, so the fabric on the backside was pretty torn up. My customer had asked for the chair to be refinished in addition to replacing the old, worn and torn fabric with fabric she had left over from a previous reupholstering job I had done for her dining room chairs. (See link below).
http://finalefurniture.blogspot.com/2018/06/french-dining-chairs-reupholstered.html

After removing the old fabric, as I had suspected, the chair had been stuffed with horsehair on the

Waterfall Nightstand

Waterfall Nightstand Before

This adorable nightstand was the last piece of the waterfall collection of furniture which completed the bedroom set we refinished and restored. Unlike the art deco nightstand, this one was lightweight, with gorgeous woodgrain hiding beneath the watermarks and rings on the top and a few minor scratches on the sides. But it had great bones, so to do it justice, needed carefully detailed stripping. Because of the curved edge in the waterfall furniture style, refinishing is time consuming work, but well

Waterfall Nightstand After

worth it.

The grooves on the outer edges of this piece was where the old stain accumulated once stripper was applied so I used a wood carving tool and carefully scraped out all the extra gunk (that's what I call it!) This made it easier to sand and ultimately stain with the golden pecan stain I selected to match the other furniture in this set, which was a set of dressers a headboard and footboard.

This nightstand was my favorite piece because it was cute and tiny, thus easier to handle than the larger furniture items. I could pick it up and place it on my work table (saving my back in the process) so I could get a better look at the work that it required.

Caned Parlor Chair

Caned Chair Before

Caned Chair After

This little parlor chair had broken cane on the seat, but was otherwise in good condition, albeit a bit scratched up. I had never done caning, but I knew that with a little research, the right tools and a bit of determination I could figure it out, so I began reading about caning and found plenty of videos on YouTube and other "how tos" in various sites on the world wide web.

The concept was simple enough. First step is to remove the spline, then pull out the damaged caning. Once that is removed, you chisel away any remaining glue and debris and clean out the spine groove so that the new spline can be installed. Since the spline comes in various sizes, you need to know what size it is before you purchase new spline, otherwise it may not fit. I didn't realize there were so many sizes!