Mahogany Buffet Refinished

Buffet Before

Buffet After

One of my personal favorite refinishing woods is mahogany. Being a darker wood with a natural reddish tone, when refinished the woodgrain is more apparent, making it look fabulous. When furniture comes out of a manufacturing plant, much of it hides the natural grain of the wood. Unlike refinishing, furniture right from the factory woodgrain isn’t as prominent as it is upon stripping.

This buffet was a good, sturdy piece that had seen some wear, but overall was in great shape. There were minor scratches on the top, a few on the front legs and sides, but nothing that stripping and sanding can’t remove. Surface scratches are almost always removed when sanding, however, if the scratch is a gouge, sanding can only do so much. Especially with veneer furniture. If you sand too deeply, you will remove the veneer and go too far into the wood beneath (big problem!) That’s why we love working with antiques; the wood, even if it has veneer, is thicker and much more durable, thus better to work with on the refinishing end. 

That being said, the finishing product looks fabulous. Once it was stained and protected with satin polyurethane, Jim polished the original hardware, a Federal Style, and once again the piece looked like new (if not better!) I love the way hardware makes a piece truly stand out. Over time the brass will oxidize, faded and dull. But polished, it shines and adds beauty and freshness to any piece of furniture.

The beauty of working with a piece such as this mahogany buffet is that you have so many color choices with stain. Our customer chose “Carrington,” by Varithane. It’s a rich, warm color with no overly red tones. Mahogany can accept most stains, but seldom can you go a lot lighter with it because the wood is naturally reddish and darker, like walnut. A good tip to keep in mind when choosing stain is the wood itself. 

Darker woods usually cannot go much lighter than their natural color, but lighter wood, such as maple, birch or pine can accept both light and dark colors of stain. An example is if you were to put the same color stain on five different types of wood, each one would look different. Some wood has more grain than other wood, such as oak compared to birch. There are also different types of the same wood; tiger oak, tiger maple, birds eye maple, and so many more. The choices are endless as are the stain colors, so it’s not difficult to narrow down which stain is the right one for you.

Luckily we have plenty of experience in choosing the right stain for your project (unless you are 100% sure what you want). But no matter, the finished furniture item will always be the one you love the most.

Antique Bench Trash To Treasure Showpiece

Antique Loveseat After

Antique Loveseat Before

Everyone has heard the term “One man’s trash is another man’s treasure.” This is one example of it. Our customer had told us his wife had found this bench on the side of the road. Evidently someone had tossed it out, with the trash. Luckily she saw the beauty hidden beneath a century of grime, dirt and stains. It had been in his workshop for a while so he decided to surprise her for Christmas and get it refinished.

This loveseat had a strong structure. Nothing was broken, just old and stained out fabric. This was going to be a challenge both of us would welcome. Little did we know just how gorgeous the wood beneath would become and present us with a showpiece.

After Jim removed the old fabric and springs, he began the tedious task of stripping the old finish. He discovered that this bench had never been re-upholstered, all was original, hence the stains and saggy seat. The underside of the bench had a vertical support board in the center on which a spring was mounted that was much higher than the other springs. This caused it to lift up past the rest of the springs. More likely the case was that the spring that was installed was a bit too large for that area and a smaller spring should have been used since it would have a different tension than the springs which were attached to the webbing. This wouldn’t be a problem because my plan was to use webbing with foam and cotton batting instead of springs. 

Jim was rather unsure of how the wood would accept the stain once he had the old finish completely stripped and sanded. He discovered the wood was quite “splotchy” and he thought it would maintain that look after it was stained. I realized that I’d seen this before, this type of reddish splotchy look in a couple of chairs I’d done before. They were made of bloodwood, which has this type of appearance. Bloodwood can be found in southern Africa. It is very unique because once the tree is cut, it “bleeds” with a reddish sap. This tree has medicinal qualities that can be used for healing. If you’d like to read more about bloodwood, check out this link: https://www.amusingplanet.com/2014/05/the-bloodwood-tree.html

We mixed two stains to create the perfect mix for this bench and wow! The color was perfect for the look we’d envisioned! The splotchy appearance was no longer visible. The stain flowed and covered the wood beautifully and we were very happy with the results. After Jim worked his magic with the stain and polyurethane, I could work mine. We chose the perfect fabric, a lovely gold threaded diamond pattern on a burgundy background. This is traditional fabric which we both agreed would be perfect for our customer’s décor. I used time and true upholstery techniques and lined the bottom with new webbing. (My pneumatic stapler is my favorite new tool!) 

Once the webbing was in place, I secured burlap over the top to strengthen the seat and maintain the tension. I had a 2” section of high density foam which was cut to size and placed on top of the burlap. Followed by Dacron, which was securely stapled around the perimeter. This added thickness and a firm seat. This was followed up with layered poly batting, creating a “crown” so the center of the bench curved with nice, rounded lines. Once everything was secured, I was able to install the beautiful fabric. We we right, it worked great. The last and final step was stapling the dust cover to the bottom to cover the webbing and finish off the bench. 

This was truly a gorgeous piece of furniture. And to think, someone tossed it out with the trash. Now it’ll become someones treasure for another century. Long after I’m gone, this bench will be gracing the home of future generations. I’m thrilled to be a part of it! This was definitely one of our favorites, a showpiece.

To see the other bloodwood furniture, check out this link: http://finalefurniture.blogspot.com/search?q=bloodwood+chair

Checkerboard Antique Card Table

 

Card Table Before

Card Table After

Every once in a while we get a totally unique piece of furniture that is one in a million. One of the many aspects of furniture restoration is the wide variety of items that come our way. It’s always a surprise! At times the surprise comes when we see it. Other times the surprise comes after we remove the years and years of grime to reveal the beauty beneath it. This antique card table with a checkerboard center was such a piece.

It’s hard to know origins of furniture, such as how old an item is, where it was made, what kind of wood is was made from. We have seen mostly oak, walnut, cherry and even some more exotic woods such as bloodwood and olive wood. At times we’ve seen wood we can’t easily identify. With this unique table we quickly realized it was made of many types of wood combined to create a work of art which ended with a center design in a checkerboard or chess table.

However, it was completely covered with years of grime, dirt and who knows what else. Hidden away in a garage for over thirty years, this table was likely overlooked and became part of the back storage of the space it occupied until my customer yanked it out with the intention of getting it refinished. It looked like a major undertaking since there were many pieces of wood missing that would have to be replaced as well as all that grim removed with stripper and carefully sanded so that none of the wood would be destroyed in the process. And yes, each piece of wood you see has been individually placed into the table! This alone makes it a highly unique work of art. 

Once stripped, the gorgeous wood beneath was exposed. It was comprised of maple, bird’s eye maple, walnut and mahogany. Since many of the original tiny pieces were missing, it was necessary to cut and carefully place each missing piece in its place so that it blended in with the table and look as if they were always there. As you can imagine, this was a very time-consuming process. After all those missing pieces were installed and glued, it was then stained and protected with four coats of strong polyurethane so it will hold up for another one hundred years at least. A timeless beauty can say, “Checkmate.”

Card Table Before

Card Table After

Rocking Chair Goes From Rubbish to Royalty

Rocker Before

Rocker After

Everyone’s heard the phrase, “One man’s trash is another man’s treasure. ”Indeed, this seems to be the case for many old pieces of furniture as well as a ton of other interesting finds at flea markets, garage sales and estate sales. The fun is the hunt, the pursuit of finding that special “gem” that everybody else overlooked or simply didn’t want.

Other times people find something in grandpa’s attic that they really don’t want to deal with, so they toss it out. Sometimes it goes to a land fill, other times it gets another chance and life when someone sees the beauty hidden beneath layers of grime, old fabric (or in this case, missing fabric in the back), and broken springs that once held up the seat.

Rocker Back Before

Rocker Back After

This very old rocking chair was one of the lucky ones which got rescued and brought to us. It was indeed quite the challenge because it didn’t have anything but a big hole in the back rest where the fabric once was, with little to go by on how it was constructed. But first things first. Strip, sand and stain before anything else. But in addition to the standard stripping and staining, this chair needed new rocker rungs, because the original ones were broken and barely held together with rusty screws. There was no saving them.

It’s hard to know how old this rocking chair was, but when hay or horsehair is used, it’s a sign to be pretty old. My guess would be this chair dates to the mid to late 1800’s based on its overall construction. Rusty tacks held in what we believe to be leather, which was wrapped around the top of the chair and held in place at the top, bottom and sides with those tacks. The seat looked like it had been reupholstered back in the 1920’s and not updated since then. It was really, really old and pretty hideous. The bones of the chair was good, solid oak and quite heavy. It had springs that had long ago sprung loose of their rope that held them beneath the seat cushion which was also almost gone. Needless to say, we had our work cut out for us.

Side View Before

Side View After

Jim did a fine job stripping the chair, then making the new rocker rungs before it could be stained and finished with polyurethane. Making the rungs was extremely difficult because he had to make a template to trace the old ones onto then cut the new ones with a special router bit that was much deeper than the standard size to accommodate the thicker oak he was using. After lots of sweat and a few choice words, we got it done! Finally he could attach them to the bottom of the chair and finish the process of staining and protecting with poly. Once it was all done and dry enough, then it was my turn.

The seat came first. I measured and cut the 2” thick high density foam and made it fit the new seat which was made of durable wood instead of springs. Once the foam was in place, I added two layers of quilt batting to the top of the foam for extra softness. A very dark gray vinyl was chosen for the seat cover, so I made a template then cut the vinyl to fit snugly into the chair’s arm rest in the front and uppers in the back. Going around the wood in the corners is the toughest part because you want to eliminate the bulk without cutting away too much fabric, therefore a template is essential to get it right. Once I had it taut, I started with each side, adding a tack to hold it in place then worked my ay around the entire seat, cutting carefully and trimming the extra so it would fit well. I added tacks along the entire bottom edge on all four sides. It looked great! Then came the real tough part....the back.

First I had to attach 4” jute chair webbing horizontally and vertically on the opening of the back, to securely hold the foam and fabric in place. Once this was done, I placed a 54” x 22” continuous piece of 1/2” foam and wrapped it around the top of the chair, attaching it to the front and back bottom edges with temporary tacks. I had two layers on the front and an additional thicker foam on the back to fill in the large gap created by the open area of the chair. Once I was satisfied with the placement of the foam, I kept the edges from moving around by using my trusty glue gun. Then I prepared the fabric. I needed a 21.5" x 50” section of fabric. After I cut the size, allowing for folded edges and a generous seam allowance on the bottom, I attached the fabric to the front and back bottom edges first, then added temporary tacks about 6” apart along the sides to keep the fabric taut. Next and final step, carefully nailing in the decorative nickel tacks, I started on the backside, then carefully worked my way up and over to the front side, finished with the bottom front. Adding fabric to a chair that you have no reference as to how it was done prior is quite challenging, but can be achieved by applying techniques you acquire along the way. This chair made a complete 180 from how it started, from rubbish to royalty, fit for a king. Now it can live another 150 years.

Below are the photos that my customer had sent to me asking if this chair can be refinished. I knew it would be a real challenge, but a challenge both of us were up to.

Original Photo from Customer

Original Photo from Customer

Back top original photo

Painted Cedar Chest Revival

Cedar Chest Before

Cedar Chest After

This is one of many cedar chests we have done, but it is the first one we have refinished that was painted. Personally, I can’t imagine why someone would paint a cedar chest, as the wood itself is too beautiful to cover up. My customer had purchased this painted cedar chest at an estate sale and wanted to see what was hidden beneath ugly green paint. I innerly groaned envisioning someone slapping paint on such a lovely piece of furniture. We had our work cut out for us!

The refinishing process is tedious, but when we get a painted item of furniture that the customer wants stained, it is necessary that every spec of paint is removed, because once it is stained, if not removed, that paint will be visible. Therefore, the stripping and sanding process must be done with intense precision and close attention to detail. It is easy to overlook the small crevices, but they too must be stripped of any and all remnants of paint or any other old finish. That’s where the wood carving tools come in quite handy as they allow us to get into the tiny spots that paint can get trapped.

You never really know what the wood will reveal once the paint has been removed, but as with most cedar chests, this one was was quite beautiful. It had accent strips on the front with wood “buttons” for a bit if decorative flair. It has great lines and a lift-up shelf not the inside. It was also a Lane, so a commonly known brand name that many people have experience with. Upon research, I discovered that Lane cedar chests have the date they were made stamped on the underside of the chest in reverse.  (Therefore if your cedar chest’s serial number is 649010, it was built on January 9, 1946). 

Cedar Chest Before

Cedar Chest After

The inside bottom of the Lane brand cedar chest has a large inset dowel, with a screw that you can turn to release the cedar fragrance. Cedar chests are natural moth repellants, so they are much sought after for precious linens or vintage and antique quilts, to keep them free of these destructive pests and hole-free.

Not all cedar chests have a serial or date stamp on the bottom as there were many manufacturers of cedar chests across the country. Lane is a popular brand that offers a variety of styles and sizes.

Upon completion, this lovely Lane was once again in its original condition, showing off its many tones of wood with that easily recognizable cedar fragrance that we love and moths hate!

Finished Cedar Chest

Check out other cedar chests we have refinished by clicking on these links:
https://finalefurniture.blogspot.com/2019/11/solid-cedar-chest.html
https://finalefurniture.blogspot.com/2016/08/1948-lane-cedar-chest_22.html
https://finalefurniture.blogspot.com/2015/04/elegant-cedar-chest-revival.html
https://finalefurniture.blogspot.com/2013/12/1945-lane-waterfall-cedar-chest.html
https://finalefurniture.blogspot.com/2012/06/my-waterfall-cedar-chest.html

Antique Oak Cabinet

Cabinet Before Refinishing

Cabinet After Refinishing

Oak is one of my favorite woods to work with. This antique
cabinet was made from solid oak, which had been previously stained in a medium golden color. While it wasn’t in terrible condition, it needed to be fleshed up, thus refinished. The first step as in most restoration jobs is to strip off the old finishes, including old stain and any lacquer or varnish.

The top of this piece had a bit of water damage as some one had left a planter on top and didn’t place anything beneath it. This is a commonly seen problem with wooden furniture if it is used to keep plants. If you don’t have something to protect the top from water, eventually even the most protected furniture will begin show signs of water damage, including a milky looking top coat to a deeper, darkening of the wood beneath the top layer which is harder to mask as it affects the fibers of the wood and is usually deeper than the surface. Either way, it’s always best to keep your plants on a porous barrier such as a plastic or aluminum pie pan or plate to properly protect your furniture from water damage.

Old Drawer Lining

New Drawer Lining

Once this cabinet was stripped, I chose “gunstock” stain, followed up with two coats of satin polyurethane.

The inside of the cabinet drawers and door area had been lined with outdated 1960’s era contact paper (it had to go!) I opted for wallpaper that had been used for a great replacement of headboard when we added a half bath to our upstairs. It worked well for drawer liner and mimicked the headboard front of the cabinet door. I used this for the three drawers and the shelf inside the cabinet. The final step is polishing the hardware and viola! We have a newly restored, lovely piece of oak furniture which will look great for many years.

Very Old Pie Safe

Pie Safe Before

Pie Safe After

This pie safe was very, very old. My customer had told me it belonged to her great-great grandmother and had originally come from West Virginia. She believes it dates back to the mid-1800’s. It is one of the oldest pieces of furniture we have restored and refinished so far. (Another one is a steamer trunk, also from the mid-1800’s which will hopefully be done this month, so stay tuned!)

This pie safe had been through many, many years and oh, the stories it could tell if it could speak! It had been around during the civil war, the great depression and had paralleled the election and death of many presidents as well as welcoming many children, grandchildren and great-grandchildren to this world.

While it had “good bones,” it needed a great deal of work and of course, time. The top was bent and warped, the metal and body had been painted numerous times and was literally “caked” on, so it made sense to take this oldie apart and restore each piece separately as this allowed better access to the metal work and gave Jim a chance to straighten out and repair a few things, such as the broken bottom drawer and bent, warped top.

After removing a few layers of paint from the body, Jim painstakingly began a 7-week process of removing all the paint from the tin, which had a lovely pattern which was all but hidden beneath that paint. He chose to use a drill bit that matched the size of the holes to remove the paint which had seeped into each hole, then used a wood carving tool to remove the rest. This was a very long, tedious process, but it was the only way to do it right. Once done, he had to prime then paint the metal and let it dry completely before I could paint the body.

The customer had originally wanted the pie safe stripped and stained, but once the old paint was removed, the wood used to create this pie safe wasn’t stain-worthy, so we opted for painting it white with copper spray paint for the metal inserts which had a beautiful circular design, practically invisible under all that paint. The copper was an excellent choice, as it highlighted the beautiful paint color, Sherwin-Williams "Cotton White.” For a finishing “fun” touch, I selected polka dot knobs to replace the old wooden ones to add a touch of whimsy.

After this old beauty was done, the results were absolutely stunning, one which will go into our “Finale Hall of Fame,” for sure. Definitely a great and beautiful item of furniture which will be lovingly used for many years to come.

Antique Dresser With A "Secret"

Antique Dresser Before

Antique Dresser After

We love antiques. We love the look and feel of them as well as working with them, because unlike mass-produced furniture you tend to see in today's market, antiques have a unique profile, form and structure that is lacking in "modern" furniture. This specific dresser has a great story as well as a unique feature that was discovered after we brought it home.

The photos on the left and lower right are the dresser as we had seen it in the antique store (top) and after we got it home (bottom right). We had purchased the dresser right here in Marine City in December, 2015. Jim and I were

Antique Dresser with Mirror

Antique Dresser Before

Antique Dresser After New Stain

Throughout the years we have done a good variety of dressers, each one different, with its own personality. Some of the dressers were tall, others were long and low with plenty of drawers. 

This antique dresser had three spacious drawers and a great looking mirror, with wood that was in excellent condition featuring a unique scroll design. The mirror itself had some age marks, but I always feel that this element adds to the character of the piece. 

The top of the dresser had

Country French Table

Table Before Refinishing

Table After Refinishing

Tables are probably the most common refinishing jobs we acquire and most of the time we refinish and stain the entire table. Sometimes we paint tables. For this table, we combined both techniques, using stain and paint to create a harmonious new look, a perfect facelift.

This table had been stored in a barn for many years until someone had started working on the top, stripping off most of the paint. The base, however, still had a few layers of paint on it. For this table there were at least two, maybe three coats of paint, which required a great deal of time to remove. Wood carving tools were used to get into the "nooks and crannies" of the surface as it was quite porous, therefore it had absorbed all the original white paint. Since the top would be stained, it was necessary to remove every spec of paint. If you don't remove all the paint, it will still be visible when you apply stain, especially dark stain as in this table, which was stained dark walnut.

Since the original casters were well worn, we replaced them with new black rubber casters. The sides and base were painted antique white, which completed the "Country French" look the customer had wanted to achieve. This table had great bones and needed a bit of creative elbow grease to bring it back to life. Mission accomplished!

We had also done a dining room set using the same technique, combining paint and stain in the same way. Check out this blog post to see that: https://finalefurniture.blogspot.com/2017/02/from-amish-to-amazing.html

Dresser Chalk Paint Makeover

Dresser Before Chalk Paint

Dresser After Chalk Paint

It's hard to believe that this lovely oak dresser was once used to store tools. It had been in a garage for many years being used as a tool bench and work surface so there was a bit of warping, but overall it was still in great shape. Although it had seen better times, the bones and structure were still good and we knew we could make it pretty again. We were both up for the challenge. (This was the last item in the "chalk paint makeover" using Annie Sloan's chalk paint.)

This dresser required some carpentry work before any painting could be done. The top had been split into two pieces, so Jim had to "biscuit" the two sections together and clamp them tight, then fill in the seams so that once painted, you would never know it had been broken. The left front leg had its back part broken off completely, so Jim re-engineered a new leg section, forming it perfect to match the right leg which was still in tact. Some of the drawers didn't open and close very well, so they required a bit of shaving on the table saw.

After he was done with his part of the job, I then sanded the sides and got busy painting. For this dresser, I mixed three parts graphite with one part French Linen which yielded a gorgeous color of a slate-ish gray, perfect for this particular piece of furniture. The thick, rich paint went on smoothly and looked terrific. I knew I would love this piece, since I just knew it would take on the largest transformation of the other pieces I had painted. Using clear wax on the entire dresser with black only on the bottom for accent was just enough to give it a sultry, rich look and a durable surface

The new brass drawer pulls provided the last touch of "bling," which was absolutely the crowning jewel for this amazing old girl. Wow!

Dining Table Top Refinished

Table Top Before

Table Top After

We all know how much we use our tables, therefore the top of them tends to get plenty of use, which is okay, because that's what they're for. This solid oak table was purchased twenty-five years ago and got plenty of use, so the top had some wear on it. Nothing too bad, but enough to justify a refinish, top only. It also had two leaves, so the owner wanted those refinished as well.

This great table was made by the Amish and the quality of the workmanship showed. Amish are known for their precision and attention to details as well as simplicity in structure so their furniture is easy to use and guaranteed to last a long time. The woodgrain of this table was beautiful, which became apparent after I totally stripped the top.

I kept the leaves on the table and stripped them in place (much easier) and made sure the sides of the

Antique Writing Desk

Writing Desk Before

Writing Desk Before

Long before e-mails, texts, instagram, Facebook and Twitter, people spent a lot of time composing handwritten letters as a way of corresponding with friends and family. There was a sense of satisfaction in holding that special pen and putting it to paper, allowing your thoughts to flow through your hands in a script scral that reflected your unique personality and penmanship. With the electronic, fast paced world we live in, writing letters by hand has all but become a lost art. It's definitely faster to write using a keyboard, but there's something special and magical about writing "old school," using a pen and a piece of lined paper we used in school. While writing that way now gives me writer's cramp (as does long periods of working on my Macintosh), I still enjoy the art of letter writing using fancy stationery and my favorite ink pen. It's a timeless craft that never goes out of style.

Writing Desk After

This antique writing desk was likely used for composing letters by hand and keeping track of bills and correspondence with its five generously sized cubby slots to easily organize one's life. Made of solid walnut, this writing desk had great bones, with surface scratches on the split top and really rusty screws that held the original hinges in place. I knew this would be a very challenging piece to refinish because of the many components and my favorite pet peeve, spindles.

The drawer was removable, which was great because it's much

Writing Desk After

easier to strip and sand a section of an item if it can be removed. Upon further inspection, I discovered that the cubby insert section was also removable, held in place by side boards that slid out, allowing the entire cutty section to be removed. This was a great bonus since it was quite difficult to reach in there to strip the old stain, mostly because I couldn't really see what I was doing. By removing it, I was able to strip it and see all the way to the back so it was done right. Once the removable components were stripped, I began the long, tedious task of stripping the spindles. They are the most difficult and time consuming part of any stripping project because there is simply no fast way to do it.

Edwardian Console

Console Before Refinishing

Console After

This console was an extraordinarily large piece of furniture. It's hard to judge the scale of this piece standing alone, but it comes up to the center of my five foot frame and is approximately six feet wide and twenty-one inches deep in the middle.

It had many surface scratches and had seen some wear, mostly on the top where the veneer had worn off and on the sides where the veneer had peeled off on one side and was half gone on the other. Before anything else could be done, I needed to repair that veneer on the one side and add a section to the missing left side. Luckily I was able to match the existing veneer pretty close. With veneer it's a gamble, because most of these pieces were done many years ago and the veneer they used was quite different from today's selection, but I was satisfied the veneer was appropriate for this piece and blended quite nicely.

1948 Lane Cedar Chest

Cedar Chest Before

Cedar Chest After

I found this lovely Lane cedar chest at an estate sale on my way to the grocery store. It was the last day of the sale and everything was half off! I was thrilled that this cedar chest was still there after a few people had expressed interest in it, but never came back to buy it. It was as though it was saved just for me. It was exactly what I had been searching for since spring. I was determined to find one that I could afford since I still had to put work into it to make it pretty again. My patience had paid off!

1940's Hutch Makeover

Hutch Before

Hutch After

This 1940's hutch caught by eye at a local antique shop here in Marine City. I fell in love with the great lines and gentle curves of this unique piece of furniture. A plain glass door was functional enough, but I could envision something much more suited to this beauty, so I added a leaded glass panel with bevels and glue chip glass to enhance the hutch adding classic, timeless styling.

With relish, I peeled off hideously sticky contact paper circa 1965 from the interior and painted the shelves with serenity blue chalk paint to give it a modern flair and fresh appeal to today's contemporary styles. I replaced the broken back with a section of bead board, which added vertical lines and created additional texture. It looked great! The exterior was in overall terrific shape, but needed refinishing, no easy task. Section by section, I carefully detailed
and stripped, using my special set of tools to remove many years of old finish which hid the beautiful cherry beneath.

Beautiful Oak Table Refinish

Oak Table Before

This great oak table had strong "bones," but the surface had minor surface scratches and required gentle sanding and a new finish of golden oak stain to create a better than new look. Oak is one of my favorite woods to work with because it handles sanding well, allowing the grain, commonly hidden by layers of grime and

Oak Table After

wear, to come to light. 

Decent sized, this table was the couples' primary dining table, so I made sure I put a "rush" on it and got it done quickly. Lots and lots of sanding and three coats of polyurethane, this little gem was once again a great piece of furniture that can be used for years to come.