Mid-Century Hutch Modernized

Hutch Original

Hutch Modernized

This lovely hutch came to us from a young couple who had wanted to modernize it. It had belonged to her grandmother and had seen a lot of use, so naturally she had wanted to put it to use in her home. She had asked if it could be painted, but wasn't sure what color paint. 

I suggested black, but she thought that was too dark. I then suggested navy blue, since we had previously painted a China cabinet and buffet in navy blue (See the "Furniture Gets Naval Theme" article on this blog: http://finalefurniture.blogspot.com/2014/02/furniture-gets-naval-theme.html). She loved the blue color idea, so I pulled out the Sherwin-Williams color swatches and she chose SW-6510, Loyal Blue.

The first step in any painted job is to rough up the old polyurethane gloss surface so that it accepts the primer. If you fail to do this, the primer won't stick and neither will the paint, eventually peeling off. Once you have prepared the surface, you're ready to paint. The color turned out beautiful! The customer chose new hardware, nickel handles and hinges and porcelain (kitty cat) door pulls. Modernized and a fresh new look, this old hutch is ready to create many more memories for years to come. Don't be afraid of color!

Bombay Chest Makeover

Bombay Chest Before Veneer

Bombay Chest After Veneer

Earlier this year, Jim had removed the years of grime from this Bombay chest and prepared it for my client who happened to live around the block from us. She wanted to paint the chest and all she wanted us to do is get it prepared for paint. After she picked it up, she said she'd send a photo of the painted chest.

Fast forward two months, she contacted me again. The top was cracked and she didn't want to paint it, because she was worried that the cracks would eventually split the entire surface, so she opted for a new veneer that she would stain, then paint the rest of the chest. She supplied the oak veneer, which looked like the original oak. Amy and I worked together on the veneer. I applied two coats of contact cement to the underside of the veneer and one coat to the chest top. Once the cement was dried, we carefully picked up the veneer and began to align it to the surface of the chest. I was glad for her offer to help since it's much easier to do with four hands, to properly align the veneer into position before it makes final contact. Once it makes contact, that's it. You don't have a chance to reposition it. (That's why it's called contact cement!) 

Once we had it centered, we lowered it, and BOOM! It stuck. Oops! Unfortunately, the veneer didn't quite line up with the edge of the chest top, so I had to act quickly to remove it, so we could try again. I grabbed my heat gun, plugged it in and quickly aimed it at the sticky area while Amy pulled the veneer upward. Slowly, but surely, the contact cement released and we were able to carefully lower the veneer into the correct position, covering the entire surface of the chest with enough overlap to trim. The process was a bit nerve-wracking, but the end result was a brand new veneer surface, that looked like the original surface had looked many years ago.