Wine Bar

Cabinet Before

Jim found this lonely cabinet in an antique shop in Kalamazoo.

Wine Bar After

It may have been used as a place to put silverware and linen napkins. The cabinet had definitely seen better days, but seeing its potential, Jim bought it with a thought in mind.

A wine bar, sparked by the top two drawers which lent themselves to lying bottles of wine horizontally, as they
should be kept. This required a bit of ingenuity. First, he removed the old tile top and stripped the entire cabinet free of it's prior red

Danish Chair

Danish Chair Before

Danish Chair After

I love taking on projects that involved such a lovely piece of furniture as this Danish cherry chair. The chair was extremely well made, thus also quite heavy, but after removing the cushion, I realized the weight wasn't in the wood, but in the cushion. Once that was removed, the chair itself was fairly light and easy to handle.

On the back of the chair was a stain, as if someone had spilled a darker stain on top of it and it made its way down the rear left leg. Someone tried to cover up the damage by adding glaze over the legs, which

Antique Oak China Cabinet

China Cabinet Before

China Cabinet After

We acquired this gorgeous oak China cabinet and immediately saw its potential. It was in almost perfect condition, with three mirrors, two glass shelves and two wood shelves. It had the original hardware and needed just a little work to expose its original glory.

Of course, as with all projects, I get "before" photos before beginning any project. Luckily, this large cabinet had wheels, which made it much easier to maneuver.

Other than minor scratches, the cabinet needed little other than touch-up and a good cleaning. I carefully removed the shelves, then unscrewed the angled shelving brackets, each made of brass, as well as the original brass handle and put them aside to be polished. The bowed glass door's molding had a few missing nails, so I used my pin nailer to reinforce the tiny 1/4" molding, holding the glass firmly in place. (I love my small nailer!) This process can be a bit dicy, because the molding holds the glass in place, therefore you don't have a lot of space in which to shoot nails, as the last thing you want to do it break that glass! Once that was done, I cleaned the interior glass first, then the exterior, which showed a lot of dust and smudges, likely from being stored.

Mid-Century Modern Dining Room Set

Table Before Refinishing

Table After Refinishing

Lots of photos for this job! A lovely woman from Madison Heights had acquired this mid-century modern dining table and chairs at a church rummage sale. She didn't want to tackle the refinish and re-upholstery job herself, so she called me. After she brought the set over, I was excited to get to work.

This was indeed a unique table and after a few hours of sanding, it proved to be quite the challenge. I decided to research it because I'd never seen anything quite like it. Lo and behold, it was a stranded bamboo table top!

Captain Chair Before

Captain Chair After

Out of curiosity, I researched the hardness of wood. As most people know, oak is among one of the hardest of woods, but on a scale of 0-5, oak ranks only 3.4 on the hardness scale, whereas bamboo ranks an astounding 4.7! "Ah," I thought, that's why it took so long to strip and sand this incredible surface. Four days later and it was finally ready to be refinished. I used a "natural" stain and three coats of polyurethane.

She didn't want the chairs refinished, only cleaned, so I used a cleaner specifically for wood and hand-polished each chair. The cushions were another story. The original cushions were, well, ugly. The fabric was typical of a 1950's decor, scratchy and quite uncomfortable. That could be because there was simply nothing left of the once-soft foam rubber bits. They had completely disintegrated into a substance resembling yellow-green dust. I'm so glad I removed them outside!

Seat Cushion After

Seat Cushion Before

After the fabric was removed, I peeled away the former "cushioned" seats with a large putty knife to separate them from the wood base, then scraped the powdery substance into the trash. The very worst seat crumbled so bad, it was all powder! One of the seat bottoms had to be replaced with new plywood because it was cracked and anyone other than a five-year-old would have eventually landed on the floor.

Chair Before

Chair After

Once all that was accomplished, I completed took apart the old seat cushions and used them as templates for the new seats. (I'm glad I did as seats tend to be slightly varied in size.) It was a long, tedious task to be sure, but well worth it as the new seats fit perfectly. I ended up surprising the customer by adding a corded edge, original to the first seat cushion. This not only made the edge look better, it gave the seats a defined, linear finish and wasn't too difficult to incorporate into the fabric layout.

My customer was very satisfied with the dining set and I must say, it looks terrific in her kitchen (see photo below.) I hope she enjoys this unique dining room set for many years to come.

Table and Chairs at Customer's Home