Showing posts with label footboard. Show all posts
Showing posts with label footboard. Show all posts

Friday, March 3, 2023

1940s Bedroom Refinishing Project

Low Dresser After
Low Dresser Before
This was one of several pieces of a 1940s vintage bedroom set which Jim recently refinished. It had seen some wear because it had been used for a few generations and needed some revitalizing and love. 

We were excited to take on this project which had two dressers as seen in this post. This bedroom set also had a mirror, bed with headboard and footboard and side rails (not pictured). It’s difficult to get photos of the items when they are delivered in sections. This furniture was in pretty good condition, had great bones, but the exterior had seen some wear and scratching, not uncommon for a vintage bedroom set. Luckily there was no structural or water damage which can be harder to rectify. 

Jim had blended two different stains to obtain a unique color that best suited the furniture. It turned out to be a perfect color for the dressers, resulting in a rich tone which best shows the woodgrain which was hidden prior to the refinishing. That’s one of the many perks of working with stains; custom blending which results in a unique color. It’s quite noticeable in the tall dresser (below) what a variation in color can be in the “before” photo. When furniture is made in a factory, the staining process is quite different from refinishing by hand. They use a spray stain that has a different look, more opaque so the woodgrain is not as visible as it is once it is stripped and refinished. One of the benefits of the hand stripping/refinishing process is that it exposes the natural beauty of the wood.

The scratches on the tops of the dressers were superficial, so they were easily sanded down once the dressers were stripped. Dressers require a great deal of work because each drawer is an individual section that requires removal of hardware and is treated one at a time while stripping, sanding and staining before finishing with polyurethane to protect the finishes. The low dresser (as seen in photos above) had six drawers with general depths. These older dresser have much more space than their newer counterparts and are made very well, so they are usually worth refinishing. It truly is an investment worth doing to preserve a piece of your family’s history.

Tall Dresser After
Tall Dresser Before

The taller dresser (shown left) had four large drawers and two smaller ones at the top. The oval hardware was original in the Federal style. Some customers prefer the original hardware and others like to give their furniture an updated look and replace it, but either way, refinishing a bedroom set is always worth doing because you already have made the investment in the furniture, so why not keep it for generations to come? It’s a wonderful way to honor your family’s history. 

Monday, September 25, 2017

Waterfall Headboard and Footboard

Waterfall Headboard Before

Although getting the "before" photos of this headboard was a bit tricky because of where it was located at the time, it shows enough to see the wear and scratching that had happened over the many years of being used.
Waterfall Headboard After

This headboard matched the waterfall dressers and nightstand in this bedroom set with matching "V" shaped veneer in the center and decorative wood panels that were set in on each side. A rather large piece, this headboard required refinishing on both the inside and the outside to do it justice. It required many hours of stripping and then sanding, using various grits of sandpaper to best prepare the newly exposed surface for stain.

As in the other items of furniture, I close golden pecan stain to replicate the original color and bring out the luster and gleam of the wood beneath. The results were awesome! Furniture of this era is well worth preserving and holding onto because as they say, "they just don't make them like they used to!"

Waterfall Footboard Before
The footboard had the actual waterfall feature, the curved top, and required a lot more preparation than the headboard because it had water damage on the interior side and some broken veneer here and there. Using a hot, dry iron, I was able to heat up the original glue and flatten the lifted, curling veneer enough so that it lay flat.

For the rest of the veneer that didn't want to flatten out, I carefully applied wood glue through a wood syringe (which allows you to tuck the glue into small places), and used many clamps to secure the veneer until the next day, when I was able to remove them and proceed with the stripping and sanding. Using an iron is also how you would completely removed old, damaged veneer by keeping the iron on the wood and moving it slowly while you follow it with a sharp putty knife and lift the old veneer off. It works well, but requires patience and attention to detail.
Waterfall Footboard After

The footboard, like the dressers, took a long time to refinish, but it looked fabulous when it was done.


Wednesday, September 13, 2017

Art Deco Footboard and Headboard

Art Deco Footboard Before
Unfortunately I didn't get the opportunity to take a "before"photo of the headboard and footboard of the art deco bedroom set, so I used the original photo my customer had sent me (left).

The footboard and headboard had extensive veneer damage and required large sections of veneer to be replaced. This was accomplished by using a hot (no steam) iron and removing the old veneer, then sanding the surfaces so they were smooth enough to accept the adhesive prior to dry fitting the veneer in place.

For the headboard and footboard we used two different veneer styles; oak and mahogany, but stained them both with cherry. This gave the piece a beautiful look with contrasting finishes that completed one another, similar to the original style. I love the way the richness of the wood comes through with using these two excellent quality of veneer products!

Once the veneer was cut a bit larger than the surfaces that they would be adhered to, we carefully laid them in place. Then the stripping, sanding and refinishing could be done easily. After final sanding with fine grit sandpaper, we applied cherry stain and two coats of semi-gloss polyurethane. The headboard and footboard turned out great! Luckily I was able to get an "after" photo of the footboard, seen below.
Art Deco Footboard After Refinishing
Check out the other items of this bedroom set by clicking on the links below:
Art Deco Nightstand
Art Deco Vanity
Art Deco Dresser