Antique Mahogany Swivel Table

 

Swivel Table Before

Another beautiful swivel table! This antique was made of mahogany with brass accents. The lower portion of this table had a unique “harp” design with three brass prongs, that cleaned up real nice. The top was in rough shape and had seen years of use, including water damage likely from placing a planter directly not the wood. It’s always a good idea to have a planter with a tray or aluminum pie tin to eliminate water damage. 

Swivel Table After

This table was in need of stripping, sanding and new stain. We chose special walnut stain and three coats of semi-gloss polyurethane to ensure protection from everyday use. All the brass accents, feet, harp metal and two small knobs (not seen in photo) were cleaned and polished. Polishing the brass, truly accentuates the refinishing process. It also adds a special “bling” to any piece of furniture, much like the right jewelry does for an outfit.

This style of table is used for playing board games or cards, as it has a “secret” swivel compartment beneath the top that is accessible by rotating the table 90 degrees, then opening one side to reveal the compact area beneath, just large enough to hold note pads, decks of cards and paper goods. When not being used as a game table, it folds in half and can be pushed right up against a wall and used for decorative accents such as plants, lamps or collectibles. Now that it has been refinished, this table will likely be used for many card games and other fun activities.

Table With A Twist

Table After

Table Before

My friend, Frances, had asked me to refinish this unique table which
belonged to her husband. I had never seen one quite like it. What made this table so different was that the entire top swiveled. Perhaps it had been used as a television table many years ago. In any event, what she saw was an ugly table was merely a nice table with an ugly, worn finish. It just needed a little love.

First things first, I removed the pivoting top to reveal a large metal swivel mechanism which needed some persuasion, therefore, I greased the bearings and cleaned the metal, making the mechanism much easier to rotate. It was mounted to a rather thin, broken piece of masonite, which I replaced with a piece of 1/4" plywood. Much better.