Bedroom Set Stripped and Whitewashed

Vanity Before

Vanity After

This is one of three bedroom pieces that came to us with an old yellowish paint that was at one time supposed to be much lighter. It had oxidized over the years and obtained some wear, so a refresh was in order.

My customer had wanted a whitewashed finish, so a full strip, sanding and application of white stain, which creates a whitewashed finish that she had wanted. The hardest part is always removing the old finish before anything else and with the amount of detail in this set including ball and claw feet, the stripping and sanding process took a great deal of time. This had to be done to all three pieces, removing the original hardware which luckily, was all in tact and accessible.

Dresser Before

Sometimes hardware pieces get missing so must be replaced. But

Dresser After

mostly, people prefer to use the original hardware in their restoration process.

When changing the entire appearance of an item such as going from stain stripping to painting for a more modern appearance, they will sometimes elect to replace the old hardware with newer, more modern hardware. It’s all personal preference, but it always looks great when it’s done.

Night Stand Before

Night Stand After

Art Deco Vanity

Art Deco Vanity Before Refinishing

Art Deco Vanity After Refinishing

This was the second item in the art deco bedroom set we refinished. It matched the art deco dresser,  with the same wood and matching handles. It too was made of cherry. This vanity had two sections of damaged veneer; upper right front panel and lower left, beneath the drawer. It's possible to patch small sections of broken veneer, but other times it must be replaced, as it was here. The process of removing old veneer doesn't involve any special skills or tools, just a hot (no steam) iron, a pressing cloth and patience. The iron heats up the old veneer just enough to warm up the old adhesive so you can easily slide a putty knife between the veneer and wood beneath, gently lifting it off until it's removed. This was the process I used to replace the veneer on this lovely vanity. Once the old veneer was completely removed, I glued the new veneer in place, then used a sharp utility knife to remove the excess, then my mini dremel to smooth the edges.

Antique Vanity and Mirror Makeover

Vanity Before

Vanity After

We picked up this vanity at a yard sale in Algonac on one of our numerous camping trips there this summer. It had all the original pieces and hardware. All it needed was some good old-fashioned hard work. Total refinishing. Lots of labor and love. That's truly the only way to give an old beauty such as this another chance at life. My personal pet peeve is restoring spindle legs. They require a LOT of work and time in addition to detailing. This one had four spindle legs in front and four square legs in the back. Needless to say, I spent a great deal of time on the legs. The center drawer had a lovely scroll design, which was likely carved by hand sometime in the 1940s. (It also has a gorgeous mirror, which I'll add to this post one we complete it.) The legs had metal wheels, which proved to be wonderful as I was working on it.

Antique Vanity Makeover

Vanity Before

Vanity After

This vanity had been in my customer's  in-law's family for a few generations. Neglect and time took its toll on this lovely vanity as the scratched surface attested to. However, I assured my customer I would make it shine and indeed, I did. The first step was to remove the hardware then get it ready for sanding and stripping, which was immensely tedious because the sides have a fluted rounded edge which required a metal brush to remove all the previous finishes, all part of the stripping process.