Amish Oak Table and Chairs Painted and Stained

Dining Table Before
(without leaves)

 

Dining Table and Chairs
Painted w/Stained Top

This lovely oak table came with two leaves and six chairs. Our customer had wanted a different, updated look so we suggested painting combined with keeping the table top woodgrain, but staining it little darker. 

They had originally envisioned an antique white, but after reviewing their décor choices, settled on latté, which is exactly as it sounds, a coffee color with a generous amount of cream added for that perfect flavor, or in this case, color combination. 

Prepping furniture for paint, especially chairs, takes patience and time. Mainly because it is all done by hand. You can’t use a power sander for chairs (except minimally) and spend hours scuffing up all the surface area to prepare it for first primer then two coats of paint. You also can’t skimp on the prep work as it directly effects the outcome of the project. 

We stripped and stained the table top, which had minor scratches, a rich, dark walnut to bring out the beautiful wood tones. The table’s pedestal base was painted to match the chairs, all done in latté. While some people simply do not like to paint furniture, there are times when painting is a nice choice. But by no means are you limited to using only paint. The combination of using paint and stain marries two distinct styles into a well-blended upgrade to outdated furniture without sacrificing the original integrity. 

The chairs, having many spindles, take a great deal of time to prep for painting. Chairs, period, are one the most time-consuming of all furniture projects, because there's so much surface area on a chair. Plus, the more detail (hence, spindles), the longer it takes to prep them. It’s also why chairs can be costly to refinish (or paint). All those surfaces need the same amount of attention and prep time. Ultimately, you have many colors in both stain and paint to choose from for your perfect furniture project.

Antique Parlor Chair Gets New Caning

 

Cane Chair Before

Cane Chair After

When a knee ends up in the seat of a caned chair, well, you have a problem, but not to worry, because it is fixable. It simply needs to be replaced with new caning. This antique parlor chair (it was so cute) had a perfectly round seat with a broken caned center. Like many caned chairs, they are not designed for a sudden, rapid force, such as a knee pushed in the center or a child who jumps from the chair, using it as a launching pad. Cane breaking is not uncommon, especially in old chairs. Unfortunately there’s no quick way to “fix” them. The cane must be replaced.

This little gem had strand caning, which is the weaving that requires a hank of cane in a specified size that is woven directly onto the holes surrounding the perimeter of the seat. I actually prefer this caning to the “press in” spline caning, because the process is quite relaxing. I work on chairs in my lovely sunroom (lots of natural daylight) while trying to keep my cats away from their natural instinct of pulling at what I’m tugging, which is each strand of cane as I weave it through the chair! They indeed love playing. Sadie likes to “sneak” off with a section of cane then run away, feeling like she got away with it. 😂

This chair had spindles on the front legs and overall, the chair was in great shape. You can’t beat hardwood, especially in antiques. They made furniture to last back then. Therefore when people ask the question, “Is it worth restoring?” I always answer with “yes,” because you already have the value in the chair (or other furniture item) so why not get it refinished and keep it another 100 years. It’s something to pass down for future generations. Because once they’re gone, they’re gone. Preserving the past, a bit of history, is a great way to appreciate the artistry created by someone who may not be around anymore. Get it done and you won’t regret it.

Sadie, my “helper"

Drum Table from Bleak to Beautiful Black

Drum Table Painted

Drum Table Before

 A classic drum table is one of the most loved furniture items in traditional homes. This popular table has many uses and can fit almost anywhere. This drum table had a unique top with what we originally thought to be leather, but it had a paper origin and couldn’t be removed, so stripping and staining it was not an option. I recommend painting it black and it was unanimously agreed that would be the best solution for the most attractive outcome. 

This table had wheels that were kept, but in addition to the original brass hardware needed cleaning. It’s amazing just how great brass hardware polishes up. What you almost don’t notice becomes the star of the show! Hardware is like the “bling” or jewelry for any furniture. If you like the original look but want to it show up better, polishing it is a great option. We’ve also had luck with painting hardware when polishing either isn’t desired, or the customer wants a different color. So many choices! 

Many of these tables were made in the late 1930’s, but some, like this one, is a reproduction. You can usually tell by looking at how the table is assembled whether or not is is an original. Older, antique furniture makers used much larger screws and their assembly techniques were significantly different than factory reproductions. The antiques are actually easier to work on because the wood is usually much higher quality and refinishes perfectly. 

There are some die-hard traditionalists that don’t like the look of painted furniture, but sometimes it’s the best option when the wood used either isn’t that great (as in mixing and matching) or doesn’t take the stain well. In our experience, if a piece comes to us painted, there’s a 50/50 chance it won’t stain well. But each piece has a different story and history, so until you strip, you can’t know for sure. But one thing is for certain and that is the end result is always better than what you started with, no matter what option you choose.

Antique Mahogany Secretary

 

Secretary Before

The art of letter writing is almost a lost art. With the influx of everything

Secretary After

instantaneous with text messaging, e-mail and FaceTime, who wants to take the time to hand write anything? Yet, there’s something appealing to putting pen to paper and feel the words as they appear on your page. This antique mahogany secretary had been in the family for many years and had likely been witness to many such letters. It was probably used for bill paying, keeping track of household expenses and storing those stationary items to keep them accessible when you needed them. Because it was used quite a bit over the years, it was quite worn and needed refinishing. It’s hard to see in the picture, but the “after” photo shows new knobs, which were glass. (Unfortunately they don’t photograph very well.)

Secretary Inside After

Secretary Inside Before

Mahogany is one of my favorite woods to restore. It has such lovely patterns and tones that are rich with color and movement. This is a dream to strip and stain as it takes the new stain quite well. The interior also needed to be stripped, which is quite tedious because it had to come apart, otherwise you can’t reach those little cubby holes where envelopes are kept. It’s time-consuming work, no doubt about it. These things simply take a lot of time. 

There are no shortcuts to quality work. This piece, like many of that period, was a perfect size for a small office and a tidy way to keep track of those pesky papers you don’t want cluttering up your table. After it was stripped, sanded and re-stained then protected with two coats of polyurethane, it was once again a lovely piece of furniture that will be useful for many generations to come.

Antique Chair Updated to 21st Century

 

Antique Chair Before

Antique Chair After

Every household has chairs, usually lots of them. There are as many styles chairs as there are other types of furniture, but not many other furniture items are used as much as chairs, therefore they tend to get more wear than other furniture. 

Antique chairs are unique because the materials used in the 1920’s or 1930’s were limited and not as “user friendly” as they are today. This antique cherry chair was in relatively good condition, meaning it had good bones, but was in dire need of refinishing and new fabric. The fabric on this chair was not only very worn and threadbare, but no longer usable and likely had a zillion or more dust mites. 

For this type of project, Jim takes care of the refinishing and restoration process while I handle the new fabric. Jim used a custom mixed stain consisting of 25% mahogany and 75% chestnut, which looked fabulous. When the chair was finished and protected with two coats of polyurethane, I took over and tackled the fabric. I don’t claim to be an expert upholsterer (I’ll leave that to my local expert) but I can handle certain projects. Seat covers is much easier than working with an attached seat because you must allow for the fabric to go around the arms and back of the chair, which is a nail-biting experience. 

This chair originally had horse hair stuffing for the back and worn out springs for the seat. My experience with chair springs isn’t terrific, so I prefer to replace them with a sturdy new wood bottom and 2” of high density foam. The foam is covered with thick batting for extra cush for the tush, and finished with the customer’s fabric of choice. My customer chose a lovely paisley pattern,  definitely a 21st century fabric. With the freshly refinished wood and the new fabric, this chair will last another 125 years.

Antique Chair Newly Caned

 

Caned Chair Before

Caning is one of the fun parts of my work as a furniture restorer. It didn’t start out that way. In fact, the first chair I ever caned was kind of sprung on me. A customer had asked if I could cane a chair and I told her honestly, I don’t know but was willing to learn and see what I could do for her. So then it began. 

Caned Chair After

I educated myself by watching a few videos and quickly discovered a few things about caning. One, it isn’t for everyone and not everyone would enjoy the process or even attempt it. Two, there are various types of caning styles and many, many more chair styles, each one individual in how the caning is done. Three, practice makes perfect. Or, if not perfect, a whole lot better with noticeable results.

This little chair’s wood was immaculate and needed no refinishing, but was in need of a new seat. The old seat had a minor tear in it, but this type of damage only gets worse, not better and needed to be replaced. This was strand caning, which means that the caning is done by weaving through the holes surrounding the chair’s seat, using the six-step method by weaving first vertically, then horizontally twice, the third time crossing over the first vertical row, then the diagonal weave, first from the upper right corner to the lower left corner all the way across the chair before you finish with the opposite diagonal weave. (You can see this in the video to the right). 

The final top step is binding the cane by looping cane strands up and through the holes, pulling the cane strands through the holes, locking in the top binding. 

The very last step is securing the bottom strands that hang loose during the process. I wrap each one underneath the tight cane then loop and tie them off, clipping the extra. This is why it’s called strand caning, because you are working with individual strands of canes that are usually about 12-14 feet in length when they come in a tightly wrapped “hank” of 500 feet. It requires soaking and mist spraying while working so the cane remained pliable thought the weaving process.

This was my best chair so far and went together very quickly because I learned a few tricks and techniques along the way. While caning can be a daunting task, it can also be a time where you can relax and enjoy the “flow” of your work. I enjoy listening to audiobooks as I work which passes the time and makes it fun. Now I enjoy the caning process and each time it gets a little easier.

Antique Stained Glass Door Revival

 

Door Interior
Before

This antique door was well over 100 years old and had seen plenty of years of wear and weathering. The cracking was pretty severe and the windows, while amazingly weren’t broken, needed some TLC because the framework was deteriorating and held in by glaze. Unfortunately, upon removing some of the paint we discovered the door was not stainable, so our customer chose a fresh coat of paint.

The stripping process is always the most tedious in any refinishing project, but for doors a lot of the difficulty comes in with the type of paint that was used. The older the door, the harder it is to remove the paint. Milk paint was frequently used back then and with our experience, is quite difficult to remove. We either use a chemical stripper or a heat gun (or both) when we remove the old paint from most projects. 

Sometimes it’s just not possible to remove all the paint so we remove as much as we can then sand it smooth and prep it for paint. A coat of primer is necessary for any paint project whether it has had paint on it previously or not. Especially raw wood projects which always require primer. Once primed, painting flows smoothly. 

Door Interior
After

This door required more work because the customer needed the door knob and hardware moved to the opposite side because of where the door would be located, so it was necessary to remove the old hardware, fill the holes left with wood pieces, dowels and filler, sand it smooth and drill new holes on the other side of the door so that it opens correctly. The new hardware they chose was brass.

This door required refinishing as well as carpentry work. Jim made new moldings for the stained glass panels and replaced the center clear glass. The door was out of square so he made sure all was square and plumb which is necessary for a smooth installation.

As you can see in the photo to the right, once installed, the stained glass looked fabulous, adding charm and character to the kitchen. The color of the glass was not visible from the exterior due to the angle of the photo. Photos below are of the exterior before and after photos.

Door Exterior
Before

Door Exterior
After

Antique Bench Refinished w/needlepoint

Bench After

 

Bench Before

Although sturdy and strong enough to seat an adult, this antique bench was in dire need of refinishing. The front veneer had peeled off entirely while other areas that had veneer were loose. 

Since this was a natural hardwood, I removed the veneer completely since it looked better without it. The rest of the bench had no veneer and the wood was in great condition, but a bit scratched, mostly on the feet. The legs were a Queen Anne style, commonly used for this style of bench.

Prior to refinishing the bench, I first removed and found it had the original straw and batting, which was commonly used for making cushions one hundred years ago. I replaced that old straw with a 2” foam cushion and a layer of quilt batting for extra seating comfort. 

The bench required stripping, sanding and staining. I chose a mid-tone chestnut stain, which brought out the natural beauty of the wood. Satin polyurethane finished off the freshly stained wood so it remains protected for many years to come. My customer had her own needlepoint seat cover that she had wanted to use to replace the stained, worn old topper. The transformation was incredible, a nice piece of furniture anyone would be proud to own.

Metal Bar Stool Makeover

Bar Stool w/caning replaced

 

Bar Stool w/broken cane

Bar stools were popular in the mid-sixties and many are still around with some wear, a testament to their use. This one was unusual because it was made with wood and metal with a caned seat as well as a caned back. 

The back was in great shape, but the seat was broken and the wood had seen quite a bit of wear and fingerprint oils left on the top back. This is not uncommon because that’s the spot that gets the most initial touching when you pull the barstool out to sit in it. 

And boy! These stools were heavy! Made of solid iron, they were weighty and still had many years of use. However, with the broken seats they weren’t safe to sit in, so in addition to Jim’s touching up the wood on back and seat, I needed to replace the caning on two of these four barstools. 

These seats were made with “press in” caning, which means that the caning is purchased as one large section and pressed into the seat in a grove area and is then held in with spline that is pushed into the groove, following a line of glue. The caning must first be soaked for up to two hours along with the spine before it can be installed. You must measure the opening of the spine as well as the space between each cane opening to get the right size for each project. This differs from strand caning, a different process in which the caning is woven through the item with holes surrounding the edge following seven steps from start to finish. That type of caning is much  more time consuming and costly because it’s much more involved. Both types of caning are initially much lighter than the old caning because the old cane was either naturally aged or stained by the manufacturer. I don’t recommend staining because it dries out the caning with is a natural product, therefore letting it age and darken over time is preferable.

Bar Stool New Cushion

Bar Stool Old Cushion

In addition to replacing the broken cane I also made four new cushions which were used for comfort and to protect the caning. I initially took apart one of the cushions and created templates from it so that the new cushions would fit the chairs perfectly. I added cording to the top and bottom edges and finished each cushion with a zipper. 

Each projects brings with it new challenges that present opportunities to put to use the skills we’ve honed over the years as well as learn new skills as they need to be learned. There’s simply no better teacher than experience and giving it the old “college” try. Even better than college, just doing it, as the saying goes. With a completed project comes a certain sense of accomplishment and another skill honed or learned to add to our arsenal of mad skills. 😁

Peg Leg Knitting Table Refinished and Repaired

Knitting Table Before

An antique knitting table such as this was useful for storing knitting needles and yard as well as other essentials a knitter would use in her arsenal of creative tools. Somewhere along the line the front left leg broke, thus had a “peg leg” appearance and didn’t stand up on it’s own. Luckily, we were able to repair the broken leg by drilling a hole on the top portion and the broken part of the leg, then glue them back together with a dowel. This is the correct and most durable way to repair a leg such as this one, which isn’t very large to start with.

Knitting Table After

The rest of the cabinet needed some touch up, a knob replacement on the bottom drawer and a completed refinished top that was stripped, sanded, stained and protected with two coats of polyurethane. The entire bottom of the sides was missing, so we replaced that with matching plywood cut to size. It simply won’t do to have your knitting needles fall out and end up on the floor. 

This was the second knitting cabinet we’ve done, but this one was a bit lighter wood than the first one which you can see by clicking on this link: http://finalefurniture.blogspot.com/search?q=knitting+cabinet

It’s nice to have a few projects that we can compare to other projects we’ve done that are similar. These knitting cabinets were commonly used at the turn of the century and have been preserved throughout the years as they can are versatile and can be used as a display cabinet in a hallway or a great storage spot which doesn’t take up a lot of space.

Mid Century Modern Dressers

Tall Dresser After

Tall Dresser Before

Sometimes I have no words for the furniture that comes to us. This is one of those times. This was a Kroehler dresser set, a classic mid-century modern set that at its creation was probably very beautiful. Somewhere along the line the original hardware was lost (who knows) and replaced with completely different (not matching) hardware in a different finish. 

The original drawer pulls were the ones on the bottom two drawers, The center drawers had “scoopy” handles which were not at all correct for this period and the top large drawer had four knobs, also not matching. To say the least, this dresser had a bunch of mismatched pulls that simply didn’t work.

Long Dresser After

Long Dresser Before

Our customer wanted these dressers refinished and stained, however we realized that once we started stripping it wasn’t stained originally, but painted with a glaze treatment. Plus, there were broken veneered corners that wouldn’t have looked good if filled in and stained, so we suggested paint, which turned out to be the best option for these pieces. 

As much as we prefer exposing the beautiful wood hidden beneath layers of paint, sometimes it’s not possible because when we get painted pieces, it’s usually for a reason. But occasionally we get painted pieces that have gorgeous wood beneath and it takes on a completely different look once stripped and stained.

For these dressers, once the holes created by all the handles were filled in, sanded and smoothed out, painting covered them and they once again had a classic, clean line look common to the mid-century modern furniture people gravitate to. It had gotten an upgrade that worked great for these pieces. We also worked on two nightstands (not pictured) that were a part of this set but we didn’t get the “after” pictures of them. Then our customers decided to get a headboard painted to match the rest of the furniture so now they have a complete set that all matches. This one turned out great!

Dining Table Upgrade and New Cushions on Chairs

Dining Table Before

Dining Table
and Chairs After

This lovely Queen Anne dining table had a well-worn top, but was overall in great condition. Our customer had wanted to have the top refinished and the legs painted black. I completely stripped the top in an afternoon and Jim took care of the side edges, preparing them for paint. 

Once it was primed, I painted the side of the table edge while he spray painted the legs. You simply can’t beat the look of spray painting furniture when able to do so. It isn’t possible for everything, but when we can, we chose spraying. Brush painting isn’t too bad though and with black, it is an easy color to blend well with any color stain you decide to use with it.

Chair After

Chair Before

She had purchased the table alone and needed chairs, so she found four chairs separately that matched the table perfectly. The chairs were in great shape, but she wanted the seats reupholstered and chose a black vinyl with a diamond shape, a small rectangle of gold accents to finish off the design. The material was very elegant and made a great seat cover to match the black portion of the table. Even though the chairs and table wasn’t a family at first, when all was done, they got along just fine and made a great addition to this lovely kitchen.