Antique Mahogany Parlor Chair

Parlor Chair Before

Parlor Chair After

This was a small, mahogany parlor chair in need of some TLC. It had a few broken sections which Jim was able to repair and then touch it up since the finish was in good condition. Touching up a piece of furniture is a less expensive alternative to a total stripping and refinishing, which involves completely removing the old stain down to bare wood and applying new stain and polyurethane.

This chair had nice carvings on the backrest with Queen Anne style legs. The seat was in pretty bad condition, so the springs had to be removed and retied on a new webbing bottom. 

My customer had selected fabric from one of my previous jobs, a lovely gold diamond design on burgundy material, which was perfect for this style of chair. What was once a nice cushion was completely gone, so after the springs were retied, I secured them with burlap which keeps the springs securely in place and allows for a nice construction of the other materials that followed. 

After the burlap was on, I added three layers of raw cotton to make the seat nice and fluffy, followed by three layers of dacron, which is a soft batting that adds comfort and bounce to the seat. The final step was attaching the gorgeous material and finish it off with a double welt cord that follows the bottom edge of the seat.

Small enough to stash in a corner and perfect for additional seating, this parlor chair is a perfect addition to any dining room, adding beauty as well as function. 

Worn, Sturdy Chair Gets Facelift

Chair After

Chair Before

This worn chair was in rough shape when it came to me. Although it was quite sturdy, the exterior was in need of a major facelift. The chair had taken a beating by an overzealous dog which had chewed up the left seat section, showing exposed springs. 

The chair had once been a light tan material but had darkened with use and age as the fabric was quite worn out. This was an extremely heavy chair with a strong frame and lots of springs which gave it plenty of bounce. Springs feel good in a chair only when they are not poking through it!

The first step involved in this massive project was removing the old material and documenting (literally) each step as I carefully pulled staples and nails out of each section of the chair. This type of chair has several areas and each one has a specific methodology to put together as well as take apart. Taking it apart is exactly the opposite of building it, which means that I had to remove the center, left and right outer sections first, before tackling the interior seating area. This process is vital to assembling all these components when reupholstering the chair, since I used the original fabric to make templates for the new fabric, which was a blue seat with plaid top and backing, making this a unique, two-tone chair. 

Couch and Chair Cushion Renewal

Chair Before

Chair After

This is one of a two-piece set of wicker furniture that received updated cushions with a plush, blue material selected by the customer who also supplied the photos.* She had wanted an updated, modernized appearance for these well worn and loved cushions and chose a lovely color to suit the new appearance. 

The chair matched the wicker couch (photo below). For each cushion I used the original pattern and created the new cushion covers. Since the foam was in usable condition, we decided to keep it instead of replacing it.

There were a total of eight cushions, four smaller for the backrest and four larger from the seats. These cushions were the same 23" width, just the depth was longer for the seats, which were 37-1/2" deep compared to the 20" depth (or height) for the backrests. 

For this job the cushions were a different variety from previous cushions I have made, because they had a "fold-over" style, instead of traditional "boxing." Simply put, this means that the top and bottom are made from one continuous piece of fabric, "folded over," instead of there being two separate top and bottom sections and stitching them to the boxing.

Couch Before

Actually, this style of cushion is much easier to insert the foam into, due to the longer, "overlapping edges" zipper, which creates a larger opening so the foam can be easily slipped into it. Sometimes it is necessary to wrap the foam in a very soft plastic material known as "silk film," which is used in the furniture industry for exactly this purpose. It reduces the friction between the foam and the slipcover that goes over it. 

This process involves wrapping the foam completely with the film and then using a vacuum to shrink the foam by sucking the air from the exterior which then reduces the size of the foam so it easier to insert it into the narrow zippered opening of the outer covering. By making the foam smaller, you have an easier time fitting it into these smaller openings. Although this can certainly be done without using the silk film ( I've done it!), it's easier to use it than not.

In some ways these cushions were easier to construct, once I figured out exactly how the construction was done. I lined up my large outer [top and bottom] material by nothing the centers, then matching up those centers with the zipper panel (a separate piece). After that was accomplished, I knew my corners would line up.

Couch After

 

Once the zipper panel was stitched into place, I attached the side panel boxing, also aligning it with a notched top that matched the outer cover. This system worked well as all the edges were then lined up as they should be. A little ingenuity, patience and time gets the job done.

(Photos were supplied by customer).

Hutch Updated to 21st Century

 

Hutch Before

Many people have a China cabinet or hutch such as this one as they a useful to house those precious collectibles, dishes and fancy glassware. And likely because they tend to be large and cumbersome, people are reluctant to replace them with newer versions because of cost, sentimentality or wanting to leave it to a loved one. This is one of the things we enjoy doing, breathing new life and purpose into such a treasured piece of furniture. Although this cabinet had more than served its purpose and was far from retiring, it required some updating. Still an attractive piece of furniture, it was well worth doing to give it a modernized look while still retaining the elements which were original to the design.

Hutch After

Our customer had wanted to keep the wood look instead of selecting paint, and had chosen a fog gray stain so she could still see the woodgrain. She had also asked that the top scalloping in the center be removed, one update, and the other that the plate rack on the bottom portion be eliminated. She had other plans for this large hutch which didn't involve using it for dishes and collectibles. Therefore Jim cut off the outdated scalloped top and carefully removed the plate rack, which resulted in a modernized, streamlined cabinet. Luckily, this massive piece of furniture came in two sections, as most large pieces do. 

There was a lot of prep work involved. Once the scalloped top and plate rack were removed, he proceeded to mask off the glass and mirrors and start the tedious process of stripping the entire thing. This was quite a lengthy process because of the glass and large mirrors on the top half of the hutch. It was also a large area to cover and some of it was hard to reach, even for Jim who has long arms! So after the stripping and sanding was complete, Jim finished this piece off with satin polyurethane to protect the surfaces. The finalized refinished hutch was stunning. Same bones, different facing. The best of both worlds. 

Our customer had chosen new hardware which looked fabulous and is using this lovely piece as a display case in her office environment. It's very cool to see it in its new home, isn't it? Leave comments below. We'd love to hear from you.

1940’s Waterfall Dresser Refinished

Waterfall Dresser After

Waterfall Dresser Before

This was a lovely waterfall dresser that had sustained some burn damage on the top right side. Other than that, it was in pretty decent condition. It also had a matching round mirror (not pictured) that we refinished, in addition to the dresser. I decided not to include it in comparison, since the "before" photo didn't include the mirror, as it was already detached. 

Jim was able to minimize the damage of the burn mark on the top with careful sanding. With veneer you can't sand too much or you will completely remove the veneer down to the bare wood. In furniture such as this, it's not an easy fix so better to keep the sanding to a minimum. Jim decided to paint the center curved section of the front top drawer and the backing since originally it had some kind of painted feature which had long since worn away. It looked better than leaving it stained with an uneven, unattractive color. It also matched the new hardware very well. The plastic back section of the original knobs were broken, so out customer had decided to replace them with new hardware. 

Our photo on the top left is the "before" version, which shows a bit of the top. Since our customer had to order the hardware and it took a few weeks to get it, we were unable to get an "after" photo of this dresser, so the one you see on the right was supplied by the customer. However, they posted the refinished dresser along with the mirror on our Facebook page, so here it is. It looks pretty good!

Dresser with Mirror

1932 Cedar Chest Refinished and Restored

Cedar Chest After

Cedar Chest Before

This is a vintage 1932 Lane cedar chest, with a walnut exterior. The top had been covered with material a foam because whoever had used it previously had done some real damage to the original top. Once Jim removed the foam top, what he saw was startling. 

The wood top had been completely unusable. It was covered with the glue that had been holding the foam in place and the fabric was attached with large tacks. Evidently whoever had done this wanted to cover the top and make it an effective seating area, which is not a bad way to go if you don't have the resources to refinish and restore the piece of furniture. After discussion the possibilities with the customers, they decided to replace the veneer with new veneer (good choice) and it looked great. Jim ordered a walnut veneer that had a self-stick feature which is a great way to go since you do not require adhesive to attach it.

Of course the entire cedar chest had to be stripped, sanded and refinished. Once that was done and the new veneer had been installed, he stained the entire cedar chest with English Chestnut stain (this year's most popular stain!) It turned out terrific. The new walnut veneer was the cherry on top of this hope chest which is once again a lovely, usable and beautifully finished piece of furniture. 

Old Cedar Chest Top (before new veneer) 

Dining Room Chairs Re-Upholstered

Chair After

 

Chair Before

This set of four dining room chairs had outdated fabric, though it was still in pretty decent condition. The chairs were made in 1996, so the fabric was original. Not bad for 28 years old. However, my customer had wanted to update the material and chose a cream color, which looked very nice with the oak wood. 

Luckily the wood needed only a little bit of cleaning and touch-up, but nothing else. It was in really great condition. When you take care of your furniture, it shows. It also shows if furniture has not been taken care, of or had been badly used or abused. Each piece tells its own story.

For these chairs I had to invest in a new, long-nose pneumatic stapler because the backrest area of the chairs' top and bottom areas were hard to reach with my regular stapler. The long nose stapler is something I had been wanting to purchase sooner or later because there have been times recently where having one would have been pretty handy. I also found out the the staples are a completely different type that I had been using. Once I got all the stapler/staples issues figured out, I could proceed with my project of working on these four chairs.

Upon first seeing these chairs, I was unaware how to remove the back as there were no visible screws, nails or other fasteners. Once I removed the seat, it was a matter of using a flat screwdriver and loosening the bottom and hammering it upward to "lift" the back right out and pull if away from the groove at the top that it was pushed into. Once the backrest was out, I had to remove all those staples. One aspect of furniture restoration and refinishing that is time-consuming and painful is removing the original staples. After a while my right shoulder gets pretty sore, so I try not to do them all at once.

Installing the new fabric was not too difficult as I wrapped it around the backrest and stapled the inside edge so that the staples couldn't been seen. The top and bottom were a bit trickier because of the way it had to be lifted up and into, then hammered back into its original groove at the top. It was essential to line it up perfectly and hammer it in without breaking or splitting the wood. I decided to work on one chair at a time, completing the backrest first and then the seats. Each seat received new foam because the old foam was very worn out and not supportive at all. I also topped off the seat with a bit of quilt batting.

Because of the pattern, I wanted to make sure it lined up at the back of the seat and the bottom of the backing so it looked like a continuous line of material. I accomplished this by putting the seat in position once the backrest was installed then actually installing a couple of screws from the seat's underside to make sure the seat would end up where it was supposed to. Once that was secured, I placed the fabric on the cushion and lined it up with the backrest. 

I tacked the sides so that the fabric would stay in the right position, then proceeded to attach the seat fabric. It worked beautifully. After the material was secured, I finalized attaching it to the seats and finished off the seats' underside with chambray, the black fabric used as a dust cover in most chairs. For these type of chairs it serves as a finished look. The new fabric is very nice and updated as well as durable. I recommended my customer use Scotchguard to protect it from potential stains and she agreed.

Antique Eastlake Dresser Makeover

Dresser After

Dresser Before

This is a great example of a perfect "before" and "after" photo of an old, beat up dresser that had seen better days and lots of wear. It is an Eastlake style dresser made of solid oak. The top was pretty much destroyed and needed replacement. There's only so much you can do with refinishing and restoration. Sometimes a total replacement is required, such as in the top. 

Jim made a brand new top using sassafras wood, which has a similar wood grain as oak, which matched perfectly with this dresser. He opted to paint it using chalk paint and treated with wax, which protects the finish and makes it easy to clean. He chose a lovely brushed brass for the drawer pulls which looks stunning with the new color.

This dresser has four large drawers and two smaller ones at the top. Each drawer bottom has been replaced since many were either missing or not operative any longer. The drawers were constructed with dovetail joints, so it was made well as new, but as the years pass by, it got its fair share of use and likely, neglect over time. What you see in the "before" photo it the way it looked when we got it home. The "after" photo is what it looked like once it was complete. 

This dresser is also for sale, asking $375.00. It is solid wood and will make a nice addition to your bedroom.

Classic Dresser Upgrade

Dresser After Painting
with new top

Dresser Before Painting
and worn out top

Jim rescued this cute little dresser from the depths of someone's garage to make it pretty again. It was the perfect flip dresser that has three spacious drawers and dovetail joints. This is a desirable feature in dressers.

This dresser had a durable structure, except for the top, which was in rough shape, so Jim made a brand new top and stained it with English Chestnut stain, which complements the blue chalk paint.

The new hexagon shaped drawer pulls are nickel, which work well with the blue color.

This dresser is for sale, asking $375.00. The measurements are 40" wide x 18-1/4" deep x 33-1/2" tall. Please contact me if you are interested in purchasing this dresser.

Antique Dresser Freshly Painted "In The Navy" Blue - for Sale!

Dresser After Painting
FOR SALE!

Dresser Before

What you see here is an original antique oak dresser that has been completely modernized with paint, but retaining its original look by reusing the hardware. The frills on the door fronts were removed for a streamlined, clean look. 

First it was stripped, sanded and then painted in a lovely dark shade called "In The Navy." Jim chose to paint this dresser with chalk paint, which requires a finishing treatment of waxing upon completion of painting. The was protects the paint and makes it strong and durable and easy to take care of as it provides a hard finish to the paint, protecting the wood. We've used wax paint on several projects and they always look terrific.

The original hardware was brass, so he cleaned and polished it, making it pop on the newly painted color. The interior drawers were stained and the bottom compartments behind the doors was painted in a light color. Although its primary function was a dresser, this lovely renovated piece of furniture can also be used as a buffet since it has plenty of storage for silverware and plates below and behind the doors. If you wanted a coffee bar, it could be used for that as well. And of course, its original use as a dresser will still suffice. 

This piece is currently for sale. Asking price is $425.00, so please get it touch with us if you are interested!

Tavern Chairs' Revival

Chair After

Chair Before

A set of four chairs that very much looked like they'd be at home in a 19th Century English Tavern, had been neglected for a long time and needed life breathed back into them. This photo shows the worst of the four, since it looked like it had been left out in the weather. It was in pretty rough shape. 

The original seat and back were black vinyl, with upholstery tacks surrounding the seat area and sides of the top. The seats were torn and the foam was destroyed. Time to renew.

There was a lovely medallion carving in the center of the back, which was almost invisible prior to refinishing. Made of solid (and I mean SOLID) oak, these chairs must have weighed 40 lbs. each. This made the refinishing and reupholstery project tough, because of how many times needed to move the chairs to complete the work.

To save time, Jim removed the black vinyl and got to work. He opted to take them apart so he could access the areas that needed to be re-glued and repaired and that's the best and proper way to do it. Apart, he sanded the pieces down to bare wood then stained them with English Chestnut stain.  Once the new stain was applied, the chairs were put together and "brought back to life." The final step was sprayed the polyurethane, and wow! The chairs were beautiful and that beautiful flower medallion just popped! 

Once he was done working his magic, it was time for me to work mine. The chairs needed new fabric. My customer and I agreed gray would be a nice color. The old padding was not usable, so each chair got new foam and batting on the seats. As I stated before, these chairs were HEAVY! Since adding material requires a lot of moving the chair around, it was necessary to lift them up to put on my work table then down again on the floor for stapling and then up on the table again to continue other parts. You get the picture. 

The curved back portion of the chair was trickier than it first looked, because each chair needed a template which I had to create from the chair's measurements instead of using the old material, since it was so distorted and badly damaged it was unusable. Upholstery has many challenges, one being sometimes you simply do not know what is involved until you get into it. Such was the case with the backs. Once I figured out that part, measuring the material properly was crucial, because if the measurement was incorrect, it wouldn't fit. 

I created templates out of card stock, which gave me the precise size of each fabric section. I had to line up the top edges of the curved portion of the top prior to stitching, so that once it was pulled into position, it would fit snugly to the bottom edge before I could attach the underside with staples. This required a lot of lifting, turning, more lifting, more turning, etc. Good body mechanics is essential when doing this heavy lifting.

The last step in the process was adding the double welt cord around the seat to finish it off with a polished, professional look. I used hot glue on the double welt cord, as it is the most effective way to attach welt cord, but I also like to reinforce welt cord with tiny nails to make sure it doesn't move over time. Needless to say I was extremely happy to finish these heavy, but lovely, tavern chairs.

Oak Dining Table Makeover

Dining Table After

Dining Table Before

A classic oak dining table never goes out of style. One of the more popular tables we refinish are like this very one. Due to time and use, this table had seen some wear for many years and needed a lot of TLC. Basically in great condition, this solid oak table needed to be stabilized prior to refinishing. Some of the original wood components of the table were missing or broken, so Jim reconstructed them to stabilize the table. 

At some point wheels had been added, but they were metal and rusting, so Jim replaced them with new rubber wheels. Traditionally, wheels aren't recommended for dining tables, but sometimes they are useful when the person plans on moving the table's location.

The color had been faded, showing its wear. Our customer chose a lovely stain color, English Chestnut, which worked quite well for the table as well as the chairs it came with.  He used satin polyurethane to give the surface a durable finish and it looked great once it was done.

The chairs and table were not an original set, but once they were finished, the wood actually matched very well. The chairs will appear in a separate blog post titled, "Tavern Chairs' Revival."