Monday, September 29, 2014

Charming Antique Desk

Desk Before
Desk After
This antique mahogany desk was an amazing yard sale find. Although the top left edge molding was broken, the bones were good, more importantly, the handles were all intact, a huge plus! I also knew it was a big refinishing job since I wasn't sure how to replace that top rail.

My first goal was to remove all the hardware before stripping the entire desk. I put all the pieces in a closed container so I don't misplace them. (This is the preferred method to which I keep track of small items.) This desk was unique, since all four sides needed stripping, as the backside can face the room if chosen. Normally the back of furniture remains unfinished, since most are placed against a wall. Because the back had been allowed to be seen required additional stripping and sanding.

The edge molding needed a great deal of detail sanding with an orange stick, all done by hand. The lower left edge molding was missing, so that too would need to be addressed. I ended up scrapping the top molding because it would be impossible to replace it and have it look the same, but not all was lost as I was able to salvage it and create the missing molding on the center drawer edge as well as the missing molding on the lower left inside of the desk. That was I was guaranteed to match the red mahogany stain, while maintaining the integrity of the piece.

After I removed all the brass hardware, I started the intense stripping process. It was quite time-consuming, between camping trips and other projects. I would spend evenings sitting on my desk polishing the various components of the hardware. Each drawer had seven (7) individual pieces; the handle, two coin-shaped brass rings, two screws and two nuts, which were round, making them a bit challenging to remove. This is one of the features of a very old piece of furniture; the hardware is usually not exact and quite different from modern hardware, down the the nuts (no pun intended.) I used copper cream, which works beautifully to remove tarnish from brass, then an actual brass polish to really give it a shine.

Taking the extra time to clean the hardware to its original condition makes any furniture piece look 100% better! The clean hardware is the "bling" to the furniture's new finish and well worth it.

Wednesday, September 10, 2014

Mosaic Table

Table Before No Top
Table After Mosiac
This table belonged to a friend who had passed away. It came to
me without a top. I liked the corner detail, which was hidden. My idea was to turn this little neglected gem into a work of art and as I looked at it, an idea came to mind.

First I assessed it. There wasn't much wood surface showing, so why not paint? I chose to paint it totally black. Next it needed a new top. The curved edges lent themselves to a different style. Something else other than wood would set this table off. Then it came to me. Mosaic. It was perfect! I knew I wanted it to have a bit of "bling," so I used mirror with a cobalt blue border.
Table Before

Table Before
When I got into the center area, I knew I wanted a design, and thanks to
my granddaughter, I came up with a peace sign. She was my inspiration for the peace sign because she loves them. Reminiscent of the 1960's, I thought it was also the perfect solution to my design. But that was not enough. It needed more, so I decided to paint the curved designs in the corners to bring out the flowers and make them match the colors of the glass mosaic I chose. The table was finally how I had envisioned it to be. The table had taken on a whole new look...from neglected and broken to a work of art.

Antique Table

Table Before
Table After
This antique table belonged to a cousin's husband who obtained it
from his grandmother. He estimated it was about 100 years old. It showed its age as it was in rough shape, but with a little sanding and love, the table would be good as new. The table was made of walnut and once sanded, the wood underneath the rough finish came through. It was indeed a beautiful piece!

The legs took time because of their shape and detail, so I spent a great deal of time working on them, making sure I had removed all the old finish so that it could accept the new stain easily. This table required careful sanding because of the fluted legs, a great deal of detail. After it was sanded and stripped, I chose a walnut stain with two coats of semi-gloss polyurethane finish. Once it was done, it looked as it had 100 years ago, better than new. Needless to say, our cousin was thrilled with the table and planned on using it for years to come.

Friday, September 5, 2014

Drop-Leaf Table

Drop Leaf Table After

Drop Leaf Table Before
I acquired this very old drop leaf table at a yard sale and when I asked the owner how much she wanted for it, I could hardly believe my luck! I was able to buy this table for only $2.00! I saw its potential and knew I could not only make it usable again, but could make it look better than new. I quickly paid her and loaded it into the back of my van before the woman changed her mind.

As you can see in the "before" photo, one of the ends was lower than the rest of the table, making it unstable and wobbly. That didn't bother me because I knew it was fixable. My husband, on the other hand, just

Queen Anne Table

Queen Anne Table Before
Queen Anne Table After
I came across this scratched Queen Anne style coffee table and knew it would be a great table once I refinished it. The original finished was a sandy, lighter stain, so I decided to go much darker, giving it a richer appearance. This table was made of pine and wasn't an antique, but it had good bones and needed some TLC and time. After I completed removed the old finish, I gave it a good sanding with a 220 grit before applying red mahogany stain. I was correct in choose the darker stain. The table took on a whole new personality, as the photos speak for themselves.

Wednesday, August 20, 2014

School Desk Revival

Oak School Desk Before
While in Lexington, we came across this old oak school desk at an antique store. We got a great deal on it so we brought it home along with an antique China cabinet. This desk could have belonged to a teacher, as it was reminiscent of my early school experiences. It was in great condition, but definitely in need of refinishing. It was made of solid oak with only two drawers that at one time had dividers, long gone.
Oak School Desk After


It needed a great deal of sanding and stripping and proved to be quite a chore, but it was gorgeous when I completed the restoration. I chose a walnut finish and also to keep the wooden drawer pulls, as they kept the originality of the piece. The top had not been original to the desk, (although it looked like someone had replaced it quite some time ago), therefore it took the stain differently than the rest of the desk. Eventually we sold it to a family who lived only a block away from us. Since they had no way to get the desk home, so we gladly delivered it. They said they'd been looking for a desk such as this for their son's computer. It was a win/win situation!

Cute Corner Table

Corner Table Before
Corner Table After
I got lucky when I found this adorable corner table while visiting an antique store in Birch Run, while staying there for a night earlier this year in February. We love checking out local antique stores and estate sales while traveling. You just never know when you're going to find that "special" item you've been searching for. This was the case with this little gem of a corner table, which was exactly the right size.

The top shelve, edging and drawer is cherry and the other two shelves are pine, not uncommon for an old piece such as this. I decided to remove the edging, making it easier to remove the old finish, therefore sanding each piece and making repairs on one broken one, gluing together, then clamping it so it stayed secure. The table has a name and what could be a serial number on the bottom of the drawer; Butler, Style #517 - 1105. I researched it, but couldn't find anything other than there is a furniture company by the name of Butler.
Corner Table Top After

Corner Table Top Before

A little refinishing was all it needed, so I got busy sanding and stripping the entire table, paying special attention to the ridged detail in the front of each shelf. I used many sheets of folded sandpaper and sanding blocks which work great for the minuscule ribbing on the front of the shelves. If I wouldn't have removed all the finish, the new stain wouldn't have been absorbed, thus that area would have looked odd. It paid off, because the cherry stain I used looked great.

I finished off the piece with two coats of polyurethane and chose an antique porcelain knob to replace the almost invisible knob that had previously occupied the drawer's front. I was quite satisfied with the results, as this little table now graces the landing leading to the upper level of our house.

Corner Table on Landing

Monday, August 11, 2014

Edwardian Kidney-Shaped Desk

Edwardian Desk and Chair Before
Edwardian Desk and Chair After
I came across this amazing Edwardian Kidney-shaped desk and matching chair at an estate sale and knew I had to have it. Luckily, all the drawer pulls were in tact, but the top left one was missing a screw. Easy enough to find a screw and put the pull back in. The chair was in great shape, but the fabric was quite worn and dirty. Not a problem, as I could easily replace the fabric.

Drawer Pull Before Polishing
Drawer Pull After Polishing
My first project was the chair. I found a perfect gold fabric that pulls out the painted gold "arrow" design on the chair. I removed the seat and touched up the minor scratches on the chair itself, then replaced the fabric. It turned out to be a great choice as it looked great! Next was the desk itself. I replaced the missing screw and used tung oil to polish the wood until it gleamed. (Unfortunately, I took the photo of the cleaned desk and spent hours removing the background, before I polished the handles, therefore I added the photos [above] of the drawers separately showing the newly polished handles.) 

Once I pushed the newly upholstered chair underneath the desk, I knew I had indeed made the grand finale, hence the name of my business. I loved this beautiful desk and chair and together, they make a great team. The desk and chair are currently available for $675.00. Please contact me at 586.873.1405 if you're interested in purchasing them.
Chair and Desk After
Desk After

Wednesday, August 6, 2014

My Favorite Dresser

Dresser Before
Dresser After
This is probably my favorite dresser so far that I've done. It was a sad, old dresser which I found in the basement of an estate sale in Eastpointe. It was buried under old LPs, grade school photos, contact paper and various cans of bug spray. I spotted this piece and knew I had to have it. It had great potential but boy, was it a mess!

After the young man helped me load the dresser into the van, I got it home and assessed it. The drawers were filled with memories of a man who'd gone to a school in Detroit; report cards, school photos, a pink pearl eraser, pencils, torn photographs of kids in baseball uniforms and old utility bills from 1970. This wasn't just a dresser. It had been a part of someone's life. This dresser was just crying out, make me beautiful!
Dresser Top Before
Dresser Top After

I wanted to paint the dresser (as opposed to staining it) because the wood, while sturdy and in good shape, was a bit rough. There was

Bookshelves Go Black

Bookshelf Before
Bookshelf After
This was another large job we did for a Grosse Pointe client. She loved this old set, but wanted an updated look with fresh paint. She had been to Africa many times and wanted the bookshelves, desk, parson's table and chair to match the decor of her room. I suggested she go with black and she agreed. I also suggested to remove the gold accent corners as these only dated the pieces.

Once we got the furniture home, it was a long process of sanding every surface prior to painting. She had chosen a Sherwin-Williams black, which in theory looked like it was a perfect match, but when thinned to be painted, the end result was purple! Yikes! Luckily we noticed it before Jim painted the entire set.

Desk After

Desk Before
Quick thinking was needed here as we'd already begun the painting process and couldn't delay. We ended up replacing the paint with a Home Depot Behr paint, which was absolutely perfect. Black paint is a great choice when you want to repaint furniture as it is classy and matches most decor, however, the down side is that it's difficult to work with since the absence of light makes it hard to paint all the corners, and this set had many of those.

It's also difficult to photograph black furniture since the absence of light also makes it hard to capture details. If you use a flash, you get a "hot" spot in the photograph. I took the "before" photos outdoors and the "after" photos at my client's home, which wasn't the ideal place to photograph, but you get the picture. No pun intended.
Chair After
Parson's table and chair
Parson's table after


1960's Bedroom Set

Night Stand Before
Night Stand After
This was a large furniture job for a client in Grosse Pointe. This bedroom set included a nightstand (pictured left and right), a tall dresser, a low dresser, a mirror (not pictured) and a headboard. This was a popular 1960's, Early American style set. I actually had a nightstand very similar to this one as a child. It was popular back then.

My client wanted to keep the same finish and use the same handles. I started with the low dresser, then the tall dresser, nightstand and headboard and finished with the mirror. I spent two or three days removing the tarnish from the handles, then polishing them until they looked new once again. I love the shiny new brass finish revealed after all that detail work.

There are always surprises when you remove the factory finish from furniture and this set was no exception. The wood was pine, but because various sections of board were used, there was a great deal of color variation. Personally, I love this look as you can really see the wood grain, which tends to be hidden with a factory treatment. This is the beauty of hand-finished products; seeing the gorgeous wood beneath.
Low Dresser Before
Low Dresser After









Headboard Before
Headboard After

Tall Dresser Before
Tall Dresser After

Antique Cabinet

Cabinet After
Cabinet Before
This little gem was a project for a former co-worker. She had wanted to use it for the bathroom in her cottage. She had acquired the cabinet from a friend. After seeing the potential, she decided to have it refinished. It had been worked on previously, but because of the construction, I could see that it was indeed an antique, maybe sixty or seventy years old. The exterior was in need of refinishing, otherwise it had good bones.

She wanted to maintain the look, so after stripping and sanding, I used a pecan stain, which was perfect. It retained the original color, yet with a brand new, updated look. She had ordered new knobs, but they didn't arrive prior to the completion, so I just photographed it with the old knobs, but polished the hinges and other hardware. I love little projects such as this, that serve a big purpose!